Search
MENU
- • Editing multiple devices
- • Basic Blinds Setup
- • Blinds configuration wizard
- • Light switching
- • Lighting timer basics
- • Heating and Cooling modes
- • Power limiting
- • Notification on high temperature
- • Configuring hysteresis control via Equation smart rule
- • Equithermic regulation
- • PID Temperature regulation
- • PID Cascade
- • Regulation of Boiler Cascade
- • Using statistic values in smart rules
- • Integrate multiple Core control units
- • Safe Values
- • How to combine two daily schedules in one day
- • Simple thermostat with hysteresis
- • Simple Heating management using Weekly schedule and Presence switch
- • Dimmer limits
- • Grouping or linking devices together
- • Access control
- • Static IP address configuration
- • 2019.1 - release planned for Q3 2019
- • 2018.1
- • 2017.1 - Charts updated
- • 2017.1 - Blinds automation - Depth of sun rays
- • 2017.1 - Blinds automation - angle control update
- • 2017.1 - Replace module action
- • 2017.1 - Expose devices
- • 2017.1 – Daily schedule smart rule
- • 2017.1 - Permissions
- • 2017.1 - Double click and triple click
- • 2017.1 - Set to Automatic mode - "Push buttons event" smart rule
- • 2017.1 - Multi-value switch
- • 2017.1 - Core update from the app
- • Firmware changelog
2017.1 - Replace module action
In case you need to take an IO module to a different project and you already assigned a number of smart rules to its IOs, this feature enables you to exchange it for another module in an instant.
First, scan the new module onto the bus so that Core recognizes it.
Then go to service settings of the module which is supposed to be replaced, scroll to bottom, button Replace.
A dialog appears asking to which other module of the same type to migrate to.