Search
MENU

RGB/RGBW Lights basic configuration

For RGB/RGBW lights TapHome LEDOC12 module is the best and most complete hardware option. For the control of RGB/RGBW lights you have to enable RGB Light including all related color channels on the LEDOC12. This one simple step creates RGB Light device.

Make sure that you use proper strip length that does not exceeds the 4A limit per output. For this purpose please use simple formula - Load in Watts / Voltage in Volts = Current in Amperes for every meter of strip (e.g. 12W/24V=0.5A per meter).


  1. To create RGB/RGBW light within TapHome application go to LEDOC12 module and enable RGB under RGB Lights where you have to configure all related color channels.