Search
MENU
- • Editing multiple devices
- • Basic Blinds Setup
- • Blinds configuration wizard
- • Light switching
- • Lighting timer basics
- • Heating and Cooling modes
- • Power limiting
- • Notification on high temperature
- • Configuring hysteresis control via Equation smart rule
- • Equithermic regulation
- • PID Temperature regulation
- • PID Cascade
- • Regulation of Boiler Cascade
- • Using statistic values in smart rules
- • Integrate multiple Core control units
- • Safe Values
- • How to combine two daily schedules in one day
- • Simple thermostat with hysteresis
- • Simple Heating management using Weekly schedule and Presence switch
- • Dimmer limits
- • Grouping or linking devices together
- • Access control
- • Static IP address configuration
- • 2019.1 - release planned for Q3 2019
- • 2018.1
- • 2017.1 - Charts updated
- • 2017.1 - Blinds automation - Depth of sun rays
- • 2017.1 - Blinds automation - angle control update
- • 2017.1 - Replace module action
- • 2017.1 - Expose devices
- • 2017.1 – Daily schedule smart rule
- • 2017.1 - Permissions
- • 2017.1 - Double click and triple click
- • 2017.1 - Set to Automatic mode - "Push buttons event" smart rule
- • 2017.1 - Multi-value switch
- • 2017.1 - Core update from the app
- • Firmware changelog
2017.1 – Daily schedule smart rule
Daily schedule enables you to combine both fixed time criteria and variable time criteria – sunrise / sunset. Daily schedule also includes an “Off action” meaning you will not need to assign another separate smart rule if criteria are not met.
Use case examples for the new Daily schedule smart rule:
- “Blinds shall go up at 7AM in the morning and go down at sunset.”
- “If the brightness requirement for the smart rule Blinds adjustment according to sun position is not met, blinds shall not go to their default position but rather just set a straight angle and don’t move up or down.” This was possible to do prior to introduction of Daily schedule but Daily schedule makes the configuration easier to understand.
