TapHome API

Packet Parser → HTTP

Pridal

Posledná aktualizácia: 03. 2026

Dokumentácia TapHome API

Šablóna TapHome API je PacketParser HTTP šablóna, ktorá integruje vlastné REST API TapHome Core späť do TapHome. To umožňuje komunikáciu Core-to-Core — zariadenia vystavené na jednom TapHome Core je možné zrkadliť ako natívne zariadenia na inom Core. Šablóna komunikuje cez HTTPS (cloud cez api.taphome.com:443) alebo HTTP (lokálna sieť cez http://{core-ip}/api/...) s autentifikáciou bearer tokenom.

Šablóna poskytuje 15 unikátnych typov zariadení s 15 inštanciami (225 zariadení celkovo), pokrývajúcich spínače, stmievače, senzory, merače, žalúzie, osvetlenie, termostaty a ďalšie. Každé zariadenie číta a zapisuje hodnoty pomocou endpointov getDeviceValue a setDeviceValue so špecifickými parametrami valueTypeId.

Konfigurácia

Šablóna TapHome API vyžaduje dva konfiguračné parametre:

API token — vygenerovaný na zdrojovom Core v Nastavenia > Vystaviť zariadenia > TapHome API. Token používa vlastný bearer formát (Authorization: TapHome {token}). V jednom čase je aktívny len jeden token — vygenerovanie nového zneplatní predchádzajúci.
ID zariadenia — každá inštancia šablóny sa mapuje na konkrétne ID zariadenia na zdrojovom Core. Použite discovery endpoint (/api/TapHomeApi/v1/discovery) na zobrazenie všetkých vystavených zariadení s ich ID a podporovanými typmi hodnôt.

Šablóna podporuje dva režimy prístupu s identickou štruktúrou API:

Cloud — https://api.taphome.com/api/TapHomeApi/v1/ (prístup cez internet, funguje odkiaľkoľvek)
Lokálna sieť — http://{core-ip}/api/TapHomeApi/v1/ (prístup cez LAN/VPN, nižšia latencia, vyžaduje Core 2021.3+)

Prístup cez lokálnu sieť eliminuje závislosť na internete a znižuje latenciu. Priraďte zdrojovému Core statickú IP alebo DHCP rezerváciu, pretože TapHome Core nepodporuje mDNS discovery.

Možnosti zariadení

Šablóna pokrýva 15 typov zariadení. Každý typ používa špecifické ValueType ID na čítanie a zápis stavu zariadenia cez JSON odpoveď API ($.values[?(@.valueTypeId == N)].value).

Spínanie a riadenie výstupov

Switch — binárne zapnutie/vypnutie cez ValueType 48 (SwitchState). Číta a zapisuje 1 (ZAP) alebo 0 (VYP).
Analog Output — plynulá úroveň 0–100 % cez ValueType 42 (AnalogOutputValue). Používa sa pre stmievače, ventilové pohony alebo akékoľvek analógové výstupné zariadenie.
Multi-Value Switch — číselný prepínač režimov s hodnotami 0–9 cez ValueType 49. Mapuje sa na užívateľom definované stavy pre ovládanie zariadení s viacerými režimami.

Senzory a meranie

Analog Input — generický číselný vstup cez ValueType 55 (AnalogInputValue). Len na čítanie.
Temperature Sensor — teplota (°C) cez ValueType 5 (RealTemperature) a vlhkosť (%) cez ValueType 3. Len na čítanie, interval dotazovania 15 sekúnd.
Brightness Sensor — úroveň okolitého osvetlenia (lux) cez ValueType 2. Len na čítanie, interval dotazovania 15 sekúnd.
Wind Speed Sensor — rýchlosť vetra (m/s) cez ValueType 14. Len na čítanie, interval dotazovania 15 sekúnd.
Electricity Meter — kumulatívna energia (kWh) cez ValueType 59 a okamžitý príkon (kW) cez ValueType 60. Len na čítanie, interval dotazovania 15 sekúnd.
Reed Contact — binárny stav otvorené/zatvorené cez ValueType 44. Vracia 1 (Otvorené) alebo 0 (Zatvorené). Len na čítanie.

Osvetlenie

Dual White Light — jas (%) cez ValueType 65 (HueBrightness) a korelovaná farebná teplota cez ValueType 89 (CCT).
RGB Light — plné HSB riadenie farieb: odtieň (0–360°) cez ValueType 40, sýtosť (0–100 %) cez ValueType 41, jas cez ValueType 65 a CCT cez ValueType 89.

Klíma a tienenie

Thermostat — číta aktuálnu teplotu (ValueType 5), vlhkosť (ValueType 3) a riadi teplotný setpoint (ValueType 6).
Blind — úroveň pozície (%) cez ValueType 46 (BlindsLevel) a uhol natočenia lamiel cez ValueType 10 (BlindsSlope).
Slide — úroveň pozície (%) cez ValueType 46 (BlindsLevel). Zdieľa rovnaký ValueType ako Blind, ale bez riadenia natočenia.

Všeobecné

Variable — univerzálna číselná premenná cez ValueType 62 (VariableState). Môže reprezentovať akúkoľvek vlastnú hodnotu v TapHome.

Servisná diagnostika

Modul vystavuje jeden servisný atribút — Devices — ktorý vypisuje všetky vystavené zariadenia s ich ID a typmi volaním endpointu /api/TapHomeApi/v1/discovery.

Senzorové zariadenia (Brightness, Variable, Wind Speed) obsahujú ďalší servisný atribút na úrovni zariadenia — Value Types — ktorý vypisuje všetky ValueType ID a názvy dostupné pre dané zariadenie.

Ďalšie možnosti

TapHome API tiež vystavuje niekoľko systémových ValueTypes, ktoré šablóna momentálne nedotazuje: Device Status (ID 7) pre stav zariadenia, Operation Mode (ID 22) a Manual Timeout (ID 23) pre riadenie manuálneho/automatického režimu. Existujú varianty požadovaných hodnôt pre Analog Output (ID 67), Hue Brightness (ID 68) a Multi-Value Switch (ID 71), ako aj indikátor Blinds Is Moving (ID 66). Discovery a location endpointy poskytujú diagnostické informácie o Core. Webhook push notifikácie (throttle 300 ms) ponúkajú real-time alternatívu k dotazovaniu. Tieto možnosti je možné pridať v budúcej aktualizácii šablóny.

Riešenie problémov

API vracia 401 Unauthorized

Overte, že token je správny a nebol regenerovaný — vygenerovanie nového tokenu zneplatní všetky predchádzajúce tokeny
Skontrolujte formát autorizačnej hlavičky: Authorization: TapHome {token} (všimnite si prefix TapHome namiesto Bearer)
Uistite sa, že token patrí správnej Core lokácii

API vracia 403 Forbidden

Požadované zariadenie nie je vystavené cez TapHome API. Na zdrojovom Core prejdite do Nastavenia > Vystaviť zariadenia > TapHome API a overte, že zariadenie je v zozname.

Zastarané alebo uložené hodnoty

API obmedzuje frekvenciu požiadaviek getDeviceValue na intervaly 500 ms. Požiadavky rýchlejšie ako tento interval môžu vrátiť uložené hodnoty. Porovnajte pole timestamp v odpovedi — identické časové pečiatky indikujú uložené dáta. Zvýšte interval dotazovania na minimálne 1 sekundu.

Požiadavky na zápis vracajú HTTP 503

Endpoint setDeviceValue vracia 503 (Service Unavailable) pri volaní častejšie ako každých 500 ms. Rozložte požiadavky na zápis s dostatočným oneskorením.

Na jednom Core je v jednom čase aktívny len jeden API token. Ak iný systém regeneruje token (napr. počas nastavenia Home Assistant), šablóna TapHome stratí prístup. Koordinujte používanie tokenu naprieč všetkými integráciami.

Dostupné zariadenia

TapHome API Modul

Servisné atribúty

Zariadenia

Vlastné premenné

API_token (string) TapHome API bearer token for authentication (generate in TapHome app under Settings → API)

TapHome API

Servisné atribúty

Devices

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/discovery", "GET", "", "Authorization: TapHome " + API_token);
IF response.IsSuccess
    var max := PARSEJSON(response.content, "$.devices[-1:].deviceId");
    var ret := "";
    var i := 0;
    do
        ret := ret + "(" + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].deviceId", true) + ") ";
        ret := ret + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].name", true);
        ret := ret + " - " + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].type", true);
        ret := ret + "\n";
        i := i + 1;
    loop while i < max
    
    RETURN(ret);
END

Analógový vstup (1) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (1)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (1) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (1)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (1) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (1)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (1) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (1)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (1) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (1)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (1) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (1)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (1) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (1)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (1) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (1)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (1) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (1)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (1) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (1)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (1) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (1)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (1) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (1)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (1) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (1)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (1) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (1)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (1) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (1)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (2) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (2)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (2) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (2)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (2) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (2)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (2) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (2)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (2) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (2)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (2) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (2)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (2) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (2)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (2) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (2)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (2) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (2)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (2) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (2)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (2) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (2)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (2) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (2)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (2) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (2)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (2) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (2)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (2) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (2)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (3) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (3)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (3) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (3)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (3) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (3)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (3) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (3)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (3) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (3)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (3) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (3)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (3) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (3)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (3) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (3)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (3) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (3)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (3) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (3)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (3) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (3)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (3) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (3)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (3) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (3)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (3) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (3)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (3) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (3)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (4) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (4)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (4) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (4)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (4) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (4)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (4) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (4)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (4) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (4)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (4) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (4)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (4) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (4)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (4) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (4)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (4) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (4)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (4) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (4)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (4) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (4)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (4) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (4)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (4) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (4)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (4) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (4)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (4) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (4)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (5) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (5)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (5) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (5)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (5) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (5)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (5) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (5)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (5) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (5)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (5) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (5)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (5) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (5)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (5) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (5)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (5) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (5)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (5) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (5)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (5) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (5)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (5) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (5)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (5) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (5)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (5) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (5)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (5) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (5)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (6) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (6)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (6) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (6)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (6) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (6)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (6) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (6)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (6) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (6)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (6) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (6)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (6) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (6)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (6) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (6)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (6) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (6)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (6) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (6)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (6) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (6)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (6) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (6)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (6) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (6)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (6) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (6)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (6) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (6)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (7) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (7)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (7) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (7)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (7) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (7)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (7) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (7)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (7) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (7)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (7) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (7)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (7) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (7)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (7) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (7)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (7) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (7)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (7) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (7)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (7) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (7)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (7) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (7)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (7) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (7)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (7) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (7)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (7) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (7)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (8) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (8)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (8) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (8)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (8) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (8)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (8) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (8)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (8) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (8)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (8) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (8)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (8) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (8)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (8) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (8)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (8) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (8)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (8) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (8)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (8) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (8)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (8) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (8)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (8) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (8)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (8) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (8)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (8) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (8)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (9) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (9)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (9) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (9)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (9) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (9)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (9) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (9)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (9) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (9)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (9) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (9)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (9) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (9)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (9) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (9)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (9) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (9)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (9) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (9)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (9) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (9)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (9) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (9)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (9) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (9)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (9) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (9)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (9) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (9)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (10) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (10)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (10) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (10)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (10) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (10)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (10) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (10)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (10) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (10)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (10) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (10)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (10) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (10)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (10) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (10)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (10) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (10)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (10) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (10)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (10) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (10)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (10) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (10)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (10) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (10)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (10) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (10)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (10) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (10)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (11) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (11)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (11) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (11)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (11) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (11)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (11) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (11)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (11) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (11)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (11) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (11)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (11) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (11)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (11) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (11)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (11) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (11)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (11) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (11)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (11) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (11)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (11) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (11)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (11) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (11)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (11) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (11)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (11) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (11)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (12) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (12)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (12) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (12)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (12) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (12)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (12) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (12)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (12) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (12)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (12) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (12)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (12) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (12)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (12) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (12)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (12) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (12)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (12) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (12)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (12) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (12)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (12) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (12)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (12) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (12)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (12) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (12)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (12) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (12)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (13) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (13)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (13) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (13)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (13) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (13)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (13) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (13)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (13) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (13)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (13) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (13)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (13) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (13)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (13) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (13)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (13) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (13)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (13) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (13)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (13) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (13)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (13) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (13)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (13) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (13)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (13) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (13)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (13) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (13)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (14) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (14)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (14) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (14)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (14) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (14)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (14) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (14)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (14) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (14)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (14) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (14)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (14) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (14)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (14) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (14)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (14) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (14)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (14) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (14)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (14) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (14)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (14) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (14)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (14) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (14)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (14) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (14)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (14) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (14)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový vstup (15) Analógový vstup Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový vstup (15)

Čítanie vstupnej úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analógový výstup (15) Stmievač

Plynulá úroveň výstupu (0–100 %) pre stmievače, ventilové pohony alebo analógové výstupné zariadenia

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analógový výstup (15)

Čítanie úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (15) Prepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (15)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (15) Biele svetlo

Ovládanie jasu a korelovanej farebnej teploty (CCT) pre laditeľné biele osvetlenie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (15)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektromer (15) Elektromer Len na čítanie

Kumulatívna spotreba energie (kWh) a okamžitý príkon (kW)

numeric Jednotka: kWh / kW json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektromer (15)

Čítanie celkovej spotreby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odberu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor jasu (15) Premenná Len na čítanie

numeric Jednotka: lux json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor jasu (15)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Premenná (15) Premenná

numeric json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Premenná (15)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (15) HSB svetlo

Plné HSB riadenie farieb — odtieň, sýtosť, jas a korelovaná farebná teplota

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (15)

Čítanie jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odtieňa

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturácie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis farebnej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné tienenie (15) Posuvný

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné tienenie (15)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Senzor rýchlosti vetra (15) Premenná Len na čítanie

numeric Jednotka: m/s json_path

Servisné atribúty

Typy hodnôt

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Senzor rýchlosti vetra (15)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisné atribúty

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (15) Jazýčkový kontakt Len na čítanie

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (15)

Čítanie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotný senzor (15) Teplotný senzor Len na čítanie

Meranie teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotný senzor (15)

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (15) Termostat

Aktuálna teplota, vlhkosť a nastaviteľný teplotný setpoint

numeric Jednotka: °C json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (15)

Čítanie teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadovanej teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Viachodnotový spínač (15) Viacstavový prepínač

Číselný prepínač režimov s hodnotami 0–9 pre ovládanie zariadení s viacerými režimami

numeric json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Viachodnotový spínač (15)

Čítanie stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu prepínača

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žalúzia (15) Žalúzia

Úroveň pozície (%) a riadenie uhla natočenia lamiel pre žalúzie a rolety

numeric Jednotka: % json_path

Premenná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žalúzia (15)

Čítanie úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovne žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čítanie sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žalúzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Pripojenie: Packet Parser → HTTP

Možné vylepšenia (10)

Device Status — DeviceStatus (read-only) available on all devices via discovery but not polled by template
Operation Mode — OperationMode (manual/automatic) — system property visible in getDeviceValue response
Manual Timeout — ManualTimeout — system property visible in getDeviceValue response
Analog Output Desired Value — AnalogOutputDesiredValue — separate from actual AnalogOutputValue (42)
Hue Brightness Desired Value — HueBrightnessDesiredValue — desired vs actual brightness for lighting
Multi-Value Switch Desired State — MultiValueSwitchDesiredState — desired vs actual state for MVS
Blinds Is Moving — BlindsIsMoving — motion detection for blind/slide devices
Device Discovery — Full device list with supported value types — available via module SA but not per-device
Location Info — Core location metadata and connectivity status
Webhook Push Notifications — Real-time state change notifications via HTTP POST — 300ms throttle, alternative to polling

Stiahnuť šablónu

Zdroje

TapHome API Official Documentation
taphome.com 2026-03-28
TapHome HA Integration — ValueType Reference
github.com 2026-03-28
TapHome HA Integration — API Client Implementation
github.com 2026-03-28