---
title: "TapHome API"
description: "Șablon PacketParser TapHome API — conectează orice dispozitiv al unei unități TapHome Core la o altă unitate TapHome Core prin REST API."
url: "https://taphome.com/ro/compatibility/taphome-api/"
language: ro
lastmod: 2026-03-28
generator: hugo
ai:
  topics: ["http","gateway","rest-api","cloud","local-network"]
  questions: ["Cum se integrează șablonul TapHome API cu TapHome?","Ce tipuri de dispozitive acceptă șablonul TapHome API?","Cum se conectează două unități TapHome Core prin API?","Cum se autentifică cererile TapHome API cu un token bearer?","Care este diferența dintre accesul la TapHome API din cloud și din rețeaua locală?","De ce returnează șablonul TapHome API valori din cache?"]
---

# TapHome API

Comunicație: Packet Parser → HTTP

- [Documentația TapHome API](https://taphome.com/en/support/601227274)

## Ghid de integrare

Șablonul TapHome API este un șablon PacketParser HTTP care integrează în TapHome API-ul REST propriu al unei unități TapHome Core. Astfel este posibilă comunicația între unități Core — dispozitivele expuse pe o unitate TapHome Core pot fi preluate ca dispozitive native pe o altă unitate Core. Șablonul comunică prin HTTPS (din cloud, prin `api.taphome.com:443`) sau prin HTTP (în rețeaua locală, prin `http://{core-ip}/api/...`), cu autentificare prin token bearer.

Șablonul oferă 15 tipuri unice de dispozitive, cu câte 15 instanțe fiecare (225 de dispozitive în total): întrerupătoare, dimmere, senzori, contoare, jaluzele, iluminat, termostate și altele. Fiecare dispozitiv citește și scrie valori prin endpointurile `getDeviceValue` și `setDeviceValue`, cu anumiți parametri `valueTypeId`.

## Configurare

Șablonul TapHome API necesită doi parametri de configurare:

1. **Token API** — se generează în unitatea Core sursă, în **Setări > Expun dispozitive > TapHome API**. Tokenul folosește un format bearer propriu (`Authorization: TapHome {token}`). La un moment dat este activ un singur token — generarea unui token nou îl invalidează pe cel anterior.

2. **ID dispozitiv** — fiecare instanță de dispozitiv din șablon corespunde unui anumit ID de dispozitiv din unitatea Core sursă. Folosiți endpointul de descoperire (`/api/TapHomeApi/v1/discovery`) pentru a afișa toate dispozitivele expuse, cu ID-urile lor și tipurile de valori acceptate.

Șablonul acceptă două moduri de acces, cu aceeași structură a API-ului:

- **Cloud** — `https://api.taphome.com/api/TapHomeApi/v1/` (acces prin internet, funcționează de oriunde)
- **Rețea locală** — `http://{core-ip}/api/TapHomeApi/v1/` (acces prin LAN/VPN, latență mai mică, necesită Core 2021.3+)

> [!TIP]
> Accesul prin rețeaua locală elimină dependența de internet și reduce latența. Atribuiți unității Core sursă o adresă IP statică sau o rezervare DHCP, deoarece TapHome Core nu acceptă descoperirea mDNS.

## Funcțiile dispozitivului

Șablonul acoperă 15 tipuri de dispozitive. Fiecare tip folosește anumite ID-uri ValueType pentru a citi și a scrie starea dispozitivului prin răspunsul JSON al API-ului (`$.values[?(@.valueTypeId == N)].value`).

### Comutare și controlul ieșirilor

- **Întrerupător** — control binar pornit/oprit prin ValueType 48 (SwitchState). Citește și scrie `1` (PORNIT) sau `0` (OPRIT).
- **Ieșire analogică** — nivel continuu 0–100 % prin ValueType 42 (AnalogOutputValue). Se folosește pentru dimmere, actuatoare de robinet sau orice dispozitiv cu ieșire analogică.
- **Comutator cu mai multe valori** — selector numeric de mod cu valorile 0–9 prin ValueType 49. Corespunde unor stări definite de utilizator, pentru controlul dispozitivelor cu mai multe moduri.

### Senzori și contorizare

- **Intrare analogică** — intrare numerică generică prin ValueType 55 (AnalogInputValue). Doar pentru citire.
- **Senzor de temperatură** — temperatura (°C) prin ValueType 5 (RealTemperature) și umiditatea (%) prin ValueType 3. Doar pentru citire, interval de interogare de 15 secunde.
- **Senzor de luminozitate** — nivelul luminii ambientale (lux) prin ValueType 2. Doar pentru citire, interval de interogare de 15 secunde.
- **Senzor de viteză a vântului** — viteza vântului (m/s) prin ValueType 14. Doar pentru citire, interval de interogare de 15 secunde.
- **Contor electric** — energia cumulată (kWh) prin ValueType 59 și puterea instantanee (kW) prin ValueType 60. Doar pentru citire, interval de interogare de 15 secunde.
- **Contact reed** — stare binară deschis/închis prin ValueType 44. Returnează `1` (Deschis) sau `0` (Închis). Doar pentru citire.

### Iluminat

- **Dual White Light** — luminozitatea (%) prin ValueType 65 (HueBrightness) și temperatura de culoare corelată prin ValueType 89 (CCT).
- **Lumină RGB** — control complet al culorii HSB: nuanța (0–360°) prin ValueType 40, saturația (0–100 %) prin ValueType 41, luminozitatea prin ValueType 65 și CCT prin ValueType 89.

### Climatizare și umbrire

- **Termostat** — citește temperatura curentă (ValueType 5) și umiditatea (ValueType 3) și controlează temperatura setată (ValueType 6).
- **Jaluzea** — poziția (%) prin ValueType 46 (BlindsLevel) și unghiul lamelelor prin ValueType 10 (BlindsSlope).
- **Slide** — poziția (%) prin ValueType 46 (BlindsLevel). Folosește același ValueType ca Jaluzea, dar fără controlul unghiului.

### Utilizare generală

- **Variabilă** — variabilă numerică de uz general prin ValueType 62 (VariableState). Poate reprezenta orice valoare personalizată în TapHome.

### Diagnosticare de service

Modulul oferă un atribut de service — **Dispozitive** — care afișează toate dispozitivele expuse, cu ID-urile și tipurile lor, apelând endpointul `/api/TapHomeApi/v1/discovery`.

Dispozitivele de tip senzor (Luminozitate, Variabilă, Viteza vântului) includ pentru fiecare dispozitiv un atribut de service suplimentar — **Tipuri de valori** — care afișează toate ID-urile și denumirile ValueType disponibile pe dispozitivul respectiv.

### Funcții suplimentare

TapHome API oferă și câteva ValueType la nivel de sistem pe care șablonul nu le interoghează în prezent: Device Status (ID 7) pentru starea de funcționare a dispozitivului, Operation Mode (ID 22) și Manual Timeout (ID 23) pentru controlul modului manual/automat. Există variante cu valoarea dorită pentru Analog Output (ID 67), Hue Brightness (ID 68) și Multi-Value Switch (ID 71), precum și indicatorul Blinds Is Moving (ID 66). Endpointurile de descoperire și de locație oferă informații de diagnosticare despre unitatea Core. Notificările webhook (limitare la 300 ms) oferă o alternativă în timp real la interogare. Aceste funcții pot fi adăugate într-o actualizare viitoare a șablonului.

## Depanare

### API-ul returnează 401 Unauthorized

1. Verificați dacă tokenul este corect și nu a fost regenerat — generarea unui token nou invalidează toate tokenurile anterioare
2. Verificați formatul antetului de autorizare: `Authorization: TapHome {token}` (atenție la prefixul `TapHome` în loc de `Bearer`)
3. Asigurați-vă că tokenul aparține locației Core corecte

### API-ul returnează 403 Forbidden

Dispozitivul solicitat nu este expus prin TapHome API. În unitatea Core sursă, mergeți la **Setări > Expun dispozitive > TapHome API** și verificați dacă dispozitivul apare în listă.

### Valori din cache sau învechite

API-ul limitează cererile `getDeviceValue` la intervale de 500 ms. Cererile mai rapide pot returna valori din cache. Comparați câmpul `timestamp` din răspuns — marcajele de timp identice indică date din cache. Măriți intervalul de interogare la cel puțin 1 secundă.

### Cererile de scriere returnează HTTP 503

Endpointul `setDeviceValue` returnează 503 (Service Unavailable) dacă este apelat mai des de o dată la 500 ms. Distanțați cererile de scriere sau puneți-le într-o coadă, cu o întârziere suficientă.

> [!WARNING]
> Regenerarea unui token API îl invalidează pe cel anterior pentru interfața respectivă. Dacă un alt sistem regenerează tokenul folosit de șablon (de ex. la configurarea Home Assistant), șablonul pierde accesul — de aceea coordonați folosirea tokenului între integrările care partajează aceeași interfață. La versiunile Core mai vechi, o unitate Core oferă o singură interfață TapHome API cu un singur token activ; versiunile Core mai noi (2026.1+) acceptă mai multe instanțe ale interfeței pe aceeași unitate Core, fiecare cu propriul token, astfel încât integrările separate pot folosi tokenuri separate.

## Dispozitive disponibile 225

Aceste dispozitive apar în TapHome după import.

TapHome API Modul

Atribute de service

|             |
|-------------|
| Dispozitive |

Variabile personalizate

|                      |                                                                                                    |
|----------------------|----------------------------------------------------------------------------------------------------|
| `API_token` (string) | Token bearer TapHome API pentru autentificare (se generează în aplicația TapHome, în Setări → API) |

Atribute de service

Devices

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/discovery", "GET", "", "Authorization: TapHome " + API_token);
IF response.IsSuccess
    var max := PARSEJSON(response.content, "$.devices[-1:].deviceId");
    var ret := "";
    var i := 0;
    do
        ret := ret + "(" + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].deviceId", true) + ") ";
        ret := ret + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].name", true);
        ret := ret + " - " + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].type", true);
        ret := ret + "\n";
        i := i + 1;
    loop while i < max
    
    RETURN(ret);
END
```

Intrare analogică (1) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (1) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (1) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (1) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (1) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (1) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (1) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (1) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (1) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (1) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (1) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (1) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (1) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (1) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (1) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (2) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (2) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (2) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (2) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (2) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (2) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (2) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (2) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (2) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (2) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (2) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (2) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (2) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (2) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (2) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (3) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (3) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (3) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (3) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (3) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (3) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (3) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (3) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (3) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (3) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (3) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (3) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (3) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (3) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (3) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (4) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (4) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (4) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (4) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (4) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (4) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (4) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (4) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (4) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (4) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (4) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (4) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (4) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (4) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (4) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (5) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (5) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (5) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (5) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (5) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (5) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (5) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (5) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (5) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (5) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (5) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (5) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (5) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (5) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (5) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (6) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (6) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (6) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (6) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (6) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (6) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (6) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (6) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (6) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (6) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (6) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (6) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (6) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (6) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (6) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (7) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (7) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (7) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (7) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (7) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (7) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (7) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (7) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (7) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (7) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (7) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (7) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (7) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (7) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (7) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (8) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (8) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (8) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (8) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (8) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (8) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (8) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (8) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (8) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (8) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (8) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (8) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (8) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (8) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (8) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (9) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (9) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (9) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (9) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (9) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (9) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (9) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (9) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (9) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (9) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (9) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (9) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (9) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (9) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (9) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (10) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (10) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (10) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (10) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (10) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (10) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (10) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (10) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (10) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (10) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (10) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (10) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (10) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (10) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (10) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (11) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (11) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (11) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (11) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (11) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (11) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (11) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (11) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (11) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (11) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (11) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (11) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (11) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (11) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (11) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (12) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (12) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (12) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (12) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (12) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (12) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (12) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (12) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (12) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (12) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (12) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (12) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (12) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (12) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (12) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (13) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (13) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (13) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (13) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (13) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (13) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (13) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (13) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (13) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (13) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (13) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (13) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (13) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (13) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (13) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (14) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (14) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (14) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (14) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (14) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (14) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (14) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (14) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (14) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (14) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (14) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (14) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (14) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (14) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (14) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Intrare analogică (15) Intrare analogică Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului de intrare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Ieșire analogică (15) Dimmer Citire și scriere

Nivel de ieșire continuu (0–100 %) pentru dimmere, actuatoare de robinet sau dispozitive cu ieșire analogică

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Întrerupător (15) Comutator Citire și scriere

numeric json\_path

Valori / Stări: ON · OFF

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (15) Lumină albă Citire și scriere

Controlul luminozității și al temperaturii de culoare corelate (CCT) pentru iluminat cu alb reglabil

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Contor electric (15) Contor electric Doar citire

Consumul de energie cumulat (kWh) și puterea instantanee (kW)

numeric Unitate: kWh / kW json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea consumului total

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea cererii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de luminozitate (15) Variabilă Doar citire

numeric Unitate: lux json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variabilă (15) Variabilă Citire și scriere

numeric json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scriere

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Lumină RGB (15) Lumină HSB Citire și scriere

Control complet al culorii HSB — nuanță, saturație, luminozitate și temperatură de culoare corelată

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea luminozității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nuanței

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea saturației

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii de culoare

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (15) Glisare Citire și scriere

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de viteză a vântului (15) Variabilă Doar citire

numeric Unitate: m/s json\_path

Atribute de service

|                  |
|------------------|
| Tipuri de valori |

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Atribute de service

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Contact reed (15) Contact reed Doar citire

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citire

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Senzor de temperatură (15) Senzor de temperatură Doar citire

Citirea temperaturii (°C) și a umidității (%)

numeric Unitate: °C / % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Termostat (15) Termostat Citire și scriere

Temperatura curentă, umiditatea și temperatura setată reglabilă

numeric Unitate: °C json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea temperaturii

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea umidității

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea temperaturii dorite

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Comutator cu mai multe valori (15) Comutator cu mai multe valori Citire și scriere

Selector numeric de mod cu valorile 0–9, pentru controlul dispozitivelor cu mai multe moduri

numeric json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea stării comutatorului

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Jaluzea (15) Jaluzea Citire și scriere

Controlul poziției (%) și al unghiului lamelelor pentru jaluzele și obloane

numeric Unitate: % json\_path

Variabilă: `Id` — ID-ul dispozitivului TapHome — setați ID-ul dispozitivului pe care doriți să îl controlați (îl găsiți în aplicația TapHome sau prin endpointul /discovery)

Citirea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea nivelului jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Citirea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Scrierea înclinării jaluzelei

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

**Conexiune:** Packet Parser → HTTP

Îmbunătățiri posibile (10)

- Device Status — DeviceStatus (read-only) available on all devices via discovery but not polled by template
- Operation Mode — OperationMode (manual/automatic) — system property visible in getDeviceValue response
- Manual Timeout — ManualTimeout — system property visible in getDeviceValue response
- Analog Output Desired Value — AnalogOutputDesiredValue — separate from actual AnalogOutputValue (42)
- Hue Brightness Desired Value — HueBrightnessDesiredValue — desired vs actual brightness for lighting
- Multi-Value Switch Desired State — MultiValueSwitchDesiredState — desired vs actual state for MVS
- Blinds Is Moving — BlindsIsMoving — motion detection for blind/slide devices
- Device Discovery — Full device list with supported value types — available via module SA but not per-device
- Location Info — Core location metadata and connectivity status
- Webhook Push Notifications — Real-time state change notifications via HTTP POST — 300ms throttle, alternative to polling

## Parametri de import

Introduceți aceste valori când importați XML-ul.

| Solicitat în aplicație | Implicit                               |
|------------------------|----------------------------------------|
| token                  | `xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx` |

## Surse

- TapHome API Official Documentation
  
  [taphome.com](https://taphome.com/en/support/601227274) 2026-03-28
- TapHome HA Integration — ValueType Reference
  
  [github.com](https://github.com/martindybal/taphome-homeassistant/blob/development/taphome_sdk/value_type.py) 2026-03-28
- TapHome HA Integration — API Client Implementation
  
  [github.com](https://github.com/martindybal/taphome-homeassistant/blob/development/taphome_sdk/taphome_api.py) 2026-03-28

## Documentație asociată

- [Packet Parser Integration](https://taphome.com/ro/compatibility/packet-parser-guide/)
- [Packet Parser (HTTP, TCP, UDP, FTP, MQTT)](https://taphome.com/ro/docs/integration/packet-parser/)
- [Funcții Packet parser](https://taphome.com/ro/docs/script/packet-parser/)
- [Funcții de parsare](https://taphome.com/ro/docs/script/parsing-functions/)

