---
title: "Intesis IBOX-MBS-DALI"
description: "Vezérelj 64 DALI ECG előtétet és 16 DALI csoportot a TapHome-ból Modbus RTU-n át az Intesis IBOX-MBS-DALI átjáróval. ECG-szintű dimmelés, fade idő/ráta, power-on és system-failure szintek."
url: "https://taphome.com/hu/compatibility/intesis-dali/"
language: hu
lastmod: 2026-10-08
generator: hugo
ai:
  topics: ["modbus-rtu","lighting","rs485","dali","dali-2","gateway","din-rail"]
  questions: ["Hogyan integrálható az Intesis IBOX-MBS-DALI a TapHome-mal?","Mit vezérel a TapHome sablon az Intesis DALI-hoz?","Hogyan kössem be az RS-485 Modbus RTU-t a TapHome-ról az IBOX-MBS-DALI-ra?","Hogyan rendeljek DALI rövid címeket az ECG előtétekhez?","Melyik Intesis DALI átjáró változatot támogatja a TapHome sablon?","Működik a TapHome sablon az Intesis IN703DAL0640000 (700-as sorozat) átjáróval?","Miért nem reagál a DALI busz, miközben a Modbus kommunikáció működik?"]
---

# Intesis IBOX-MBS-DALI

Kommunikáció: Modbus RTU

- [Intesis IBOX-MBS-DALI termékoldal (HMS Networks)](https://www.intesis.com/products/protocol-translator/dali-gateways/dali-modbus-server-ibox-mbs-dali)
- [HMS Networks — Intesis termékcsalád](https://www.hms-networks.com/products/intesis)
- [Intesis IN703DAL0640000 (700-as sorozat) felhasználói kézikönyv](https://www.intesis.com/docs/user-manual-in703dal0640000)

## Integrációs útmutató

Az Intesis IBOX-MBS-DALI egy DALI-Modbus protokollkonverter az Intesistől (az HMS Networks része), amely a DALI-2 világítási előtéteket és csoportokat Modbus holding regiszterekként teszi elérhetővé. A TapHome sablon az **1-csatornás RTU változatot** célozza (rendelési kód **IBMBSDAL0640000**, újra kiadva **INMBSDAL0640200** néven), és az átjáró B portján keresztül **RS-485 Modbus RTU-val** csatlakozik a TapHome-hoz.

A TapHome az újabb, **700-as sorozatú** átjárót forgalmazza, rendelési kód **IN703DAL0640000** (DALI-2 – Modbus TCP és RTU szerver, 1 DALI csatorna). A gyártó felhasználói kézikönyve (v1.0.11) szerint ugyanazt a Modbus regisztertérképet használja, így ez a sablon rá is érvényes.

A sablon lefedi egy DALI vonal teljes címezhető kapacitását: **64 egyedi ECG előtétet** (rövid címek 0–63) és **16 DALI csoportot**. Minden ECG támogatja az aktuális szint visszaolvasását (0–100 %), előtét/lámpa hibaállapot lekérdezését, valamint arc power szint, power-on szint, system-failure szint, fade time és fade rate írását. A DALI csoportok csak írható broadcast dimmervezérlést biztosítanak. Modulszinten négy broadcast service action (All On, All Off, All Set Power-on Level, All Set System-failure Level) egy Modbus írással címzi meg a DALI vonal minden előtétét.

A DALI rövid címeket, csoporttagságot, jeleneteket és min/max szinteket az ingyenes **Intesis MAPS** commissioning szoftverrel kell előre konfigurálni — csak ezután tudja a TapHome az egyes előtéteket címezni. A TapHome sablon maga nem végez DALI hálózatfelderítést vagy címzést.

## Hardveres csatlakozás

### Átjáró változatok

A TapHome sablon az **1-csatornás RTU** átjáróhoz készült. A 2-csatornás változat regisztertérképe azonos, de nem támogatja a Modbus RTU-t (csak TCP), így nem kompatibilis ezzel az RS-485-ös sablonnal.

| Rendelési kód | DALI csatornák | ECG kapacitás | Csoportok | Modbus RTU | Modbus TCP |
|---|---|---|---|---|---|
| **IN703DAL0640000** (700-as sorozat) | **1** | **64** | **16** | **Igen (Port B)** | Igen |
| **IBMBSDAL0640000 / INMBSDAL0640200** | **1** | **64** | **16** | **Igen (Port B)** | Igen |
| IBMBSDAL1280000 / INMBSDAL1280200 | 2 | 128 | 32 | Nem | Igen |

![Intesis IBOX-MBS-DALI — portkiosztás az 1-csatornás (Modbus RTU + TCP) és 2-csatornás (csak Modbus TCP) változaton](https://taphome.com/images/compatibility/intesis-dali/connections-overview_hu_e3319bd0a2fc8995.jpg)

> [!NOTE]
> A TapHome sablon a `7000 × csatorna + 100 × ECG + jel` regiszter formulát használja, `csatorna = 0` értékkel kiértékelve. Ez pontosan megegyezik az 1-csatornás IBOX-MBS-DALI-val, és a 700-as sorozatú IN703DAL0640000 átjáróval is.


### Csatlakozókiosztás (1-csatornás IBOX-MBS-DALI)

![IBOX-MBS-DALI 1-csatornás csatlakozókiosztás — tápellátás, DALI Port A, Ethernet, Console, EIA232/EIA485 Port B](https://taphome.com/images/compatibility/intesis-dali/connectors-ibox-1ch_hu_f931cc500ab15298.jpg)

Az 1-csatornás IBOX-MBS-DALI felülnézete:

- **Tápellátás** — 3 pólusú dugaszolható csavarkapocs, 24 VDC ±10 % (+ / − / Earth)
- **Port A / DALI** — 2 pólusú narancssárga kapocs, **A3 (DA+)** és **A4 (DA−)**, 16 VDC DALI tápellátás
- **Ethernet** — 1× RJ45 10/100 Mbps (Modbus TCP)
- **Console** — mini-type B USB 2.0 az Intesis MAPS konfigurációhoz
- **Port B / Modbus RTU** — **EIA485** 3 pólusú csavarkapocs `B1 (B+) / B2 (A−) / B3 (SGND)` **és** **EIA232** SUB-D9 male (alternatíva)
- **USB** — Type-A USB 2.0 csak flash meghajtókhoz (max 150 mA)
- **SWA / SWB** — DIP kapcsolók (SWA fenntartott, SWB az RS-485 lezárást és polarizációt vezérli — lásd alább Konfiguráció)

### Tápellátás

- **Bemenet:** 24 VDC ±10 % a 3 pólusú kapcson (+, −, Earth)
- **Forrás:** NEC Class 2 vagy Limited Power Source (LPS), SELV minősítésű
- **Fölérendelt védelem:** 250 V / 6 A kismegszakító szükséges
- **Földelés:** Csak a negatív póluson keresztül földelhető — **soha** ne a pozitív póluson keresztül

> [!WARNING]
> A földhurkok elkerüléséért, amelyek károsíthatják az átjárót és a csatlakoztatott eszközöket, **soha ne használj földelt pozitív pólusú DC tápegységet**. Csak a negatív póluson keresztül földelj, vagy hagyd lebegni a földelést.

### RS-485 Modbus RTU bekötés (Port B, EIA485)

Csatlakoztasd a TapHome RS-485 buszt az EIA485 kapocshoz a B porton:

| IBOX-MBS-DALI kapocs | Jel | TapHome RS-485 |
|---|---|---|
| **B1** | B+ (D+) | A+ / D+ |
| **B2** | A− (D−) | B− / D− |
| **B3** | SGND (referencia föld) | GND |

> [!WARNING]
> **Tartsd be a polaritást.** B1 = B+ (D+) és B2 = A− (D−). Az A/B keresztezése hardverkárosodás nélkül csendben megszakítja a kommunikációt.

**Kábelspecifikáció** (EIA485 korlátok):

- **Max hossz:** 1200 m egy RS-485 szegmensen
- **Max csomópont:** 32 eszköz, beleértve a TapHome mastert és az IBOX-MBS-DALI-t
- **Lezárás:** 120 Ω a busz mindkét végén — a TapHome Core beépített 100 Ω ellenállással rendelkezik a BUS kapcsain, így az IBOX-MBS-DALI-nak csak akkor kell aktív lezárás, ha az RS-485 szegmens **legszélső végén** helyezkedik el (lásd az alábbi SWB DIP kapcsolót)

> [!TIP]
> Ha az átjáró az RS-485 busz közepén (nem a végén) van felszerelve, hagyd az SWB-t OFF pozícióban, és ne adj hozzá külső lezárást.

**EIA232 alternatíva:** A Port B SUB-D9 male csatlakozó EIA232 interfészt biztosít csak TX, RX és GND jelekkel, maximum 15 m kábelhosszal. A TapHome nem támogatja natívan az RS-232-t, így az EIA485 a szabványos TapHome csatlakozás.

### DALI busz bekötés (Port A)

Csatlakoztasd a DALI vonalat a Port A narancssárga 2 pólusú kapcsához:

- **A3** — DA+
- **A4** — DA−

Az IBOX-MBS-DALI **16 VDC (±2 %)** buszfeszültséget biztosít, garantált 235 mA (max 250 mA) DALI árammal; a 700-as sorozatú IN703DAL0640000 átjáró 230 mA-t garantál (max 250 mA). A DALI a szabvány szerint polaritás-független, de ezt a belső tápot előbb engedélyezni kell az Intesis MAPS-ben, mielőtt bármilyen DALI kommunikáció működne — lásd lent a *DALI commissioning*-ot.

**DALI kapacitás egy vonalon** (hagyj ~10 % tartalékot dinamikus folyamatokhoz):

- Akár **64 ECG előtét** (tipikusan 2 mA-enként → 128 mA)
- Akár **64 DALI bemeneti eszköz** / **16 ajánlott** nyomógombok használatakor (tipikusan 5 mA-enként)
- Példa költségvetés: `64 ECG × 2 mA + 16 szenzor × 5 mA = 208 mA < 235 mA × 90 %`
- Példa költségvetés a 700-as sorozatú átjáróhoz (IN703DAL0640000, gyártói adatok): `63 ECG × 2 mA + 16 szenzor × 5 mA = 206 mA < 230 mA × 90 %`

> [!NOTE]
> A DALI természeténél fogva alacsony sebességű busz (1200 baud) 1,5 s átjáróindítási és 7 s leállítási idővel. A TapHome-ból kiadott DALI parancsok kis, de nem nulla késéssel érkeznek az előtétekhez a közvetlen vezetékes vezérléshez képest.

## Konfiguráció

### SWB DIP kapcsoló — RS-485 lezárás és polarizáció

Az **SWB DIP kapcsoló** az 1-csatornás IBOX-MBS-DALI-n csak az RS-485 busz tulajdonságait vezérli — ezen az átjárón **nincs DIP kapcsolóval beállítható Modbus slave cím** (a slave címet az Intesis MAPS-ben kell beállítani, lásd lent).

| Pozíció | ON | OFF |
|---|---|---|
| **1** | 120 Ω lezárás aktív | Lezárás inaktív |
| **2** | Polarizáció aktív | Polarizáció inaktív |
| **3** | Polarizáció aktív | Polarizáció inaktív |

- **1. pozíció = ON** — engedélyezi a belső 120 Ω lezáró ellenállást. Akkor használd, ha az IBOX-MBS-DALI az RS-485 busz **utolsó** fizikai pozíciójában van.
- **2. és 3. pozíció = ON** — engedélyezik a busz biasing (polarizáció) működést. Akkor használd, ha a buszon egyetlen más master sem biztosít biasing-et. A TapHome Core biasing-et nyújt a BUS kapcsain, így ezek általában OFF-ban maradhatnak.

> Az **SWA** ezen a hardver revízión fenntartott jövőbeli használatra, és nincs futásidejű hatása.

### Modbus RTU kommunikációs paraméterek

Minden RTU paraméter az Intesis MAPS projektben állítható be, és pontosan meg kell egyeznie a TapHome modul beállításaival.

| Paraméter | Értékek | Sablon alapértelmezés |
|---|---|---|
| Baud rate | 1200, 2400, 4800, **9600**, 19200, 38400, 56700, 115200 | **9600** |
| Paritás | none, even, odd | **none** |
| Stop bitek | 1, 2 | **1** |
| Adatbitek | 8 | 8 |
| Slave cím | 1–247 | MAPS-ben konfigurálható |

> [!TIP]
> Az Intesis átjáró az 1-csatornás változaton **egyidejűleg** támogatja a Modbus RTU-t és a Modbus TCP-t. A TapHome az RTU-t használja; egy párhuzamos BMS vagy diagnosztikai eszköz ugyanazt a regisztertérképet olvashatja TCP-n át anélkül, hogy zavarna.

### Modbus kommunikáció engedélyezése

A Modbus kommunikáció úgy engedélyeződik, hogy az Intesis MAPS-szel érvényes projektet töltesz az átjáróra (ezen a modellen nem vesznek részt DIP kapcsolók). Rövid verzió:

1. Telepítsd az **Intesis MAPS**-et egy Windows PC-re, és csatlakozz az átjáróhoz USB Console-on vagy Etherneten keresztül.
2. Nyiss meg vagy hozz létre egy projektet az `INMBSDAL---0200-Template` alapján (a 700-as sorozatú IN703DAL0640000 átjárónál válaszd az `IN-MBS-DALI-64` sablont, vagyis a Modbus alkalmazást).
3. A **Configuration → Modbus Slave** fülön állítsd be a baud rate-et, paritást, stop biteket és slave címet úgy, hogy megegyezzenek a TapHome-val.
4. A **Configuration → DALI** fülön engedélyezd a belső 16 VDC DALI busz tápellátást (lásd *DALI commissioning*).
5. Kattints a **Send**-re a konfiguráció átviteléhez; az átjáró automatikusan újraindul.
6. A **Diagnostic → Viewers**-ben ellenőrizd a Modbus kereteket a Port B TX/RX-en.

![Intesis MAPS DALI busz tápellátás konfiguráció — engedélyezd a 16 VDC DALI tápellátást az átjáró konfigurációjában a commissioning előtt](https://taphome.com/images/compatibility/intesis-dali/dali-power-maps-config_hu_60df6e9c055c6bc7.jpg)

### DALI commissioning

**A DALI címzést az Intesis MAPS-ben kell elvégezni — nem a TapHome-ban.** A TapHome sablon a DALI rövid címeket (0–63) és a csoportcímeket (0–15) a regiszter-offsetjük alapján hivatkozza; a fizikai előtéteket és csoportokat először ezekhez a címekhez kell kötni.

Magas szintű commissioning workflow (teljes eljárás az Intesis user manual, Annex A-ban):

1. A MAPS-ben nyisd meg az 1-csatornás átjáró projektjét, és menj a **Configuration → DALI → ECG Channel A** részhez.
2. Kattints a **Commissioning → Scan**-re az ECG előtétek felderítéséhez a DALI buszon.
3. Minden előtéthez rendelj **rövid címet (0–63)** a **Wink** gombbal (felvillantja a fizikai előtétet azonosításhoz) vagy az **Auto Addr.** funkcióval (szekvenciális automatikus hozzárendelés).
4. Opcionálisan állítsd be az ECG paramétereket: **Device Type** (0 = Fluorescent, 1 = Emergency, 6 = LED, …), min / max szint, power-on szint, system-failure szint, jelenet konfiguráció és **csoporttagság (0–15)**.
5. Kattints a **Commissioning → Set All**-ra, hogy a konfigurációt a MAPS-ből a DALI buszra továbbítsd.
6. Kattints a **Send**-re az átjáró-szintű konfiguráció (Modbus paraméterek, jeltérkép) visszatöltéséhez az IBOX-MBS-DALI-ba.

A commissioning után a TapHome-ban rövid címmel azonosított ECG-k (pl. **ECG 5** → `H:506` regiszter) egy-az-egyben a fizikai előtétekhez mapelődnek. A csoporttagságot is a MAPS-ben kell definiálni ahhoz, hogy a DALI Group eszközök működjenek, bár a sablon ECG-szintű *Add to DALI Group* / *Remove from DALI Group* service action-öket is biztosít, amelyek futásidőben újrarendelhetik a csoporttagságot kompatibilis firmware-en.

> [!WARNING]
> Az r1.5 user manual (2024. május) szerint a 29-es és 30-as jel (*Add to DALI Group* / *Remove from DALI Group*) az aktuális firmware-en *Not used*-ként van jelölve. A TapHome sablon még kínálja ezeket az action-öket, mivel korábbi firmware-en működtek, de a **stabil csoport-hozzárendeléseket az Intesis MAPS-ben** kell konfigurálni, nem futásidőben.
>
> A 700-as sorozatú IN703DAL0640000 átjáró felhasználói kézikönyve (v1.0.11) a 29-es és 30-as jelet olvasható/írhatóként tünteti fel, így a kézikönyv szerint ezen az átjárón az action-ök várhatóan elérhetők.

### Regisztertérkép áttekintés

A TapHome egyetlen formulát használ minden regiszterhez:

```text
H:address = 7000 × channel + 100 × ECG + signal      (egyedi ECG)
H:address = 7000 × channel + 20 × group + 6400..6415  (DALI csoport)
H:address = 7000 × channel + 6800..6815              (broadcast)
```

Az 1-csatornás változaton mindig `channel = 0`. A sablon az alábbi regisztertartományokat teszi elérhetővé:

| Tartomány | Funkció | Sablonban elérhető |
|---|---|---|
| `H:0 – H:3` | Előtét/lámpa hiba bitmaszk (ECG 63..0, 4× UInt16) | Igen — modulszintű failRegister-ként |
| `H:SA+5` | ECG előtét státusz bitmaszk (ECG-enként) | Igen — errors, warnings, info ECG-enként |
| `H:SA+6` | ECG aktuális szint 0–100 % (olvasás) | Igen — dimmer pozíció visszajelzés |
| `H:SA+7` | ECG eszköztípus enum | Igen — service attribute-ként |
| `H:SA+11..+14` | Power-on / system-failure szint, fade time / rate (olvasás) | Igen — service attribute-ként |
| `H:SA+15` | ECG arc power szint 0–100 % (írás) | Igen — writelevel, lineárisan Min/Max-ba mapelve |
| `H:SA+23..+30` | Fade time/rate, szintek beállítása, csoporthoz adás/eltávolítás | Igen — ECG-szintű service action-ként |
| `H:6400 + 20·GR` | Group arc power szint 0–100 % (írás) | Igen — csak írható DALI Group eszközként |
| `H:6801` | Broadcast Arc Power Off/On (0/100 %) | Igen — modul *All On* / *All Off*-ként |
| `H:6812 / H:6813` | Broadcast Set Power-on / System-failure Level | Igen — modulszintű service action-ként |

A bemeneti eszközök (jelenlét-érzékelők, nyomógombok, fényérzékelők) a `14000 + 640·LINE + 10·IDX + INSTANCE + 1280·SIG` címeken **nincsenek** implementálva ebben a sablonban.

## Eszközképességek

### ECG-szintű dimmelés (64 ECG eszköz)

Minden 0–63 rövid cím egyedi TapHome dimmer eszközként jelenik meg (**ECG 0** és **ECG 63** között). ECG-enkénti képességek:

- **Aktuális szint** — `H:SA+6` (0–100 %) olvasása a dimmer pozíció visszajelzéseként
- **Arc power szint** — `H:SA+15` írása (0–100 %), lineárisan mapelve a TapHome 0–1-es dimmerskálájáról az előtét konfigurált `[min level, max level]` tartományába
- **Előtét állapot** — a `H:SA+5` bitmaszk vezérli a TapHome diagnosztikát: *BallFail* és *LampFail* errors-t, *BallLimit*, *Reset* és *PowerCycle* warnings-t vált ki, *FadeRun* info-ként jelenik meg, *MissingShortAddr* error-t vált ki
- **Kommunikációs hiba észlelése** — a modul a 64 bites hibabitmaszkot olvassa `H:0 – H:3`-on, és az egyes ECG-ket a `H:SA+5` állapottól függetlenül hibásként jelöli

### Service attribute-ök ECG-enként (csak olvasható metaadatok)

Minden ECG eszköz öt service attribute-ot tesz elérhetővé, amelyek az aktuális DALI konfigurációját olvassák:

- **Main Device Type** — `H:SA+7` enum (0–8): 0 = Fluorescent, 1 = Emergency, 2 = Discharge, 3 = Halogen, 4 = Incandescent, 5 = Digital signal, 6 = LED, 7 = Switching, 8 = Colour Control
- **Power-on Level [%]** — `H:SA+11` (0–100 %) — az a szint, amelyre az előtét visszatér a DALI busz bekapcsolása után
- **System-failure Level [%]** — `H:SA+12` (0–100 %) — az a szint, amelyet az előtét a DALI busz hibája esetén felvesz
- **Fade Time** — `H:SA+13` (0–15) — DALI fade-time index (a célszint eléréséhez szükséges idő közvetlen arc power írásnál)
- **Fade Rate** — `H:SA+14` (1–15) — DALI fade-rate index (step up / step down parancsok sebessége)

### Service action-ök ECG-enként (írás)

Minden ECG hat service action-öt is biztosít online újrakonfigurálásra:

- **Set Power-on Level** — `H:SA+27` írása (0–100 %)
- **Set System-failure Level** — `H:SA+28` írása (0–100 %)
- **Set Fade Time** — `H:SA+23` írása (0–15)
- **Set Fade Rate** — `H:SA+24` írása (1–15)
- **Add to DALI Group** — `H:SA+29` írása a csoport számával (0–15) — lásd a fenti commissioning figyelmeztetést
- **Remove from DALI Group** — `H:SA+30` írása a csoport számával (0–15)

Minden írást a sablon automatikusan véglegesít a `H:SA+4 = 1` (Update All ECG Status) művelettel, ami frissíti az átjáróban gyorsítótárazott olvasási értékeket.

### DALI csoportok (16 csak írható broadcast dimmer)

A **DALI Group 0** és **DALI Group 15** között csak írható dimmer eszközök:

- **Írási regiszter:** `H:6400 + 20 × GR` (pl. Group 0 = `H:6400`, Group 15 = `H:6700`)
- **Viselkedés:** egy TapHome dimmer érték 0–1 írása `Arc Power Level = Le × 100`-at küld minden ECG-nek, amely az adott DALI csoport tagja
- **Nincs olvasási visszajelzés** — a csoport jelének nincs aktuális szint regisztere, így a TapHome a csoportszintet csak a felhasználói bemenetből követi, nem a valós előtét állapotból

> [!TIP]
> Csoportokat használj helyiségekhez vagy zónákhoz, ahol több előtét együtt dimmel. A csoporttagság ECG-enként konfigurálható az ECG *Add to DALI Group* service action segítségével vagy (előnyösebben) az Intesis MAPS-ben.

### Modulszintű broadcast action-ök

A fő modul (**Intesis DALI Gateway**) négy service action-öt biztosít, amelyek egyszerre címzik a DALI vonal minden előtétét:

- **All — On** — `H:6801 = 1` írása, 100 %-ot broadcastol minden ECG-nek
- **All — Off** — `H:6801 = 0` írása, 0 %-ot broadcastol minden ECG-nek
- **All — Set Power-on Level** — `H:6812` írása (0–100 %) az összes előtét DALI bekapcsolás utáni visszatérési szintjének konfigurálásához
- **All — Set System-failure Level** — `H:6813` írása (0–100 %) az összes előtét DALI busz hiba esetén felvett szintjének konfigurálásához

Ezek gyorsabbak, mint az ECG-enkénti írások iterálása, amikor minden előtétnek ugyanazt a célállapotot kell elérnie (pl. panic off, reggeli előbeállítás).

## Státusz LED-ek és nyomógombok

![IBOX-MBS-DALI státusz LED-ek és nyomógombok — Run, Error, Port A TX/RX (DALI), Port B TX/RX (Modbus RTU), Button A, Button B](https://taphome.com/images/compatibility/intesis-dali/status-leds-buttons_hu_1f972f8353b9228c.jpg)

| LED | Állapot | Jelentés |
|---|---|---|
| **Run** | Off / Zöld | Nincs tápellátás / eszköz tápfeszültség alatt, fut |
| **Error** | Off / Piros | Nincs hiba / hibaállapot |
| **Port A Tx / Rx (DALI)** | Off / Villogó zöld / Villogó sárga | Nincs aktivitás / TX csomag DALI-ra / RX csomag DALI-ról |
| **Port B Tx / Rx (Modbus RTU)** | Off / Villogó zöld / Villogó sárga | Nincs aktivitás / TX csomag RS-485-ön / RX csomag RS-485-ön |
| **Button A jelző** | Off / Zöld | DALI broadcast állapot: OFF / RECALL_MAX_LEVEL |
| **Button B jelző** | Off / Zöld | Nincs alapértelmezett funkció (konfigurálható a MAPS-ben) |

**Button A (DALI A)** — megnyomva DALI broadcastot vált a `RECALL_MAX_LEVEL` (100 %) és `OFF` között, hasznos a DALI vonal gyors helyszíni ellenőrzéséhez TapHome bevonása nélkül. 30 s múlva a Button A LED kikapcsol, és az előtétek visszatérnek az előző szintjükre.

**Button B** — ezen az átjárón nincs alapértelmezett funkciója; RS-485 action-ként konfigurálható az Intesis MAPS-ben.

## Szerelés

### DIN-sín (ajánlott)

![IBOX-MBS-DALI DIN-sín szerelés — EN60715 TH35 szabványos sín, rögzítő klipek a befelé néző gyári pozícióban](https://taphome.com/images/compatibility/intesis-dali/mounting-din_hu_6022c12b8152b8d4.jpg)

EN60715 TH35, lehetőleg földelt fém szekrényben. Hagyd a rögzítő klipeket a **befelé néző** gyári pozícióban, először a sín felső élét kapcsold be, majd nyomd le, hogy az alsó rész bepattanjon.

### Fali szerelés

![IBOX-MBS-DALI fali szerelés — rögzítő klipek kifelé áthelyezve, hogy a szerelőlyukak szabaddá váljanak](https://taphome.com/images/compatibility/intesis-dali/mounting-wall_hu_acd54bdbb566e31c.jpg)

1. **Válaszd le a rögzítő klipeket** az eredeti pozíciójukból (DIN-sín szereléshez), kifelé nyomva, amíg a fali szerelési pozícióba nem pattannak.
2. **Használd a ház rögzítőlyukait** a falra szereléshez.

### Hely és környezet

- **Telepítési hely:** hagyj az eszköz körül 130 × 100 × 100 mm (M × Sz × Mé) helyet a csatlakozóknak és kábelezésnek. Nettó méretek: 90 × 88 × 56 mm (700-as sorozatú IN703DAL0640000: 90 × 88 × 58 mm).
- **Környezet:** IP20, csak beltér. Üzemi hőmérséklet 0 °C és +50 °C között (user manual) / +60 °C (installation sheet), páratartalom 5–95 % nem kondenzáló. A 700-as sorozatú IN703DAL0640000 átjáró −10 °C és +60 °C között működik.

## Hibaelhárítás

### Nincs Modbus kommunikáció (a Port B Tx/Rx LED-ek kikapcsolva maradnak)

1. **Ellenőrizd az RS-485 bekötést** — ellenőrizd a B1 (B+) / B2 (A−) polaritást a TapHome RS-485 kapcsokhoz képest; a keresztezés a leggyakoribb hiba.
2. **Ellenőrizd az SGND-t** — csatlakoztasd a B3-at a TapHome földhöz. A hiányzó jelföld a megbízhatatlan RTU második leggyakoribb oka.
3. **Illeszd a soros paramétereket** — a baud rate-nek, paritásnak, stop biteknek és slave címnek a TapHome-ban pontosan meg kell egyeznie az Intesis MAPS projekt értékeivel.
4. **Ellenőrizd az SWB DIP kapcsolókat** — ha ez az átjáró az RS-485 busz fizikai végén van, állítsd az SWB 1-es pozíciót ON-ra (120 Ω lezárás). Ha a busz közepén van, állítsd az összes SWB pozíciót OFF-ra.
5. **Erősítsd meg, hogy a TCP nem tartja a slotot** — az átjáró 5 egyidejű TCP socketet és 1 RTU mastert enged; egy rosszul konfigurált MAPS kapcsolat nem blokkolja az RTU-t, de érdemes bezárni a MAPS-et a TapHome hibakeresés során.

### Modbus működik, de a DALI előtétek nem reagálnak

1. **Engedélyezd a belső DALI busz tápellátást** — az új átjárók **kikapcsolt** DALI tápellátással érkeznek. Nyisd meg az Intesis MAPS → *Configuration → DALI → DALI Channel A* részt, és állítsd a **Power the DALI bus** = Enabled-re, majd **Send** a konfigurációt. Busz tápellátás nélkül az átjáró minden DALI írásnál hardverhibát jelent.
2. **Gyors sanity check** — nyomd meg a **Button A**-t az átjárón. A `RECALL_MAX_LEVEL`-t kellene broadcastolnia, és minden csatlakoztatott előtétet on/off-ba kapcsolnia. Ha semmi nem mozdul, a DALI busz maga a probléma (bekötés, feszültség, előtét tápellátás).
3. **Futtass egy on-bus scan-t a MAPS-ben** — *Commissioning → Scan* a DALI Channel A-n kilistázza az átjáró által látott összes előtétet. A hiányzó előtétek általában áramtalan ECG-t, nem hozzárendelt DALI rövid címet, vagy a DALI busz szakadását jelentik.
4. **Ellenőrizd a rövid címeket** — a TapHome az ECG 5-öt a `H:506` regiszteren címzi; ha az 5-ös rövid címet nem rendelted hozzá a MAPS-ben, a regiszter létezik, de a fizikai előtét nincs hozzákötve.

### Egy adott ECG hibát jelez a TapHome-ban

A TapHome két hibaforrást tesz láthatóvá minden ECG-re:

- **Modul failRegister (`H:0 – H:3`)** — egy bit ECG-enként. A beállított bit kommunikációs hibát vált ki (az átjáró egyáltalán nem tud kommunikálni az előtéttel).
- **ECG ballast status (`H:SA+5`)** — ECG-enkénti bitmaszk. *BallFail* és *LampFail* error-t vált ki (hardveres előtét- vagy lámpahiba), *MissingShortAddr* error-t vált ki (az ECG válaszolt, de nincs rövid címe), *BallLimit*, *Reset* és *PowerCycle* warning-ot vált ki, *FadeRun* informatív.

Cseréld ki a hibás előtétet vagy commissionold újra a rövid címet a MAPS-ben a hiba törléséhez.

### Az írást elfogadta, de az előtét nem változtat szintet

1. **Erősítsd meg, hogy az előtét nincs fade-ben** — *FadeRun* a `H:SA+5`-n azt jelenti, hogy az előtét éppen fade-el; várj, amíg befejezi. A *Fade Time* (`H:SA+23`) rövidítése csökkenti az észlelt késést.
2. **Ellenőrizd a Min / Max szintet** — a TapHome lineárisan mapeli a 0–1 dimmerskáláját az előtétből olvasott `[min level, max level]` ablakra (`H:SA+9 / H:SA+10`). Ha mindkettő egyenlő, az előtét nem tud szintet változtatni; konfiguráld át a min/max-ot a MAPS-ben.
3. **Add/Remove DALI csoportból** — a legújabb r1.5 firmware-en ezek az ECG-szintű action-ök deprecated-ként vannak jelölve; a csoport-hozzárendelést helyette a MAPS-ben végezd el. A 700-as sorozatú IN703DAL0640000 átjáró felhasználói kézikönyve ezeket olvasható/írhatóként tünteti fel.

## Elérhető eszközök 80

Ezek az eszközök az importálás után jelennek meg a TapHome-ban.

Intesis DALI Modul

Szerviz műveletek

|                                        |                                                                                                                           |
|----------------------------------------|---------------------------------------------------------------------------------------------------------------------------|
| Mind — Be                              | 100 % arc power broadcast minden előtétnek a DALI vonalon — panic-on vagy reggeli előbeállítás egy Modbus írással         |
| Mind — Ki                              | 0 % arc power broadcast minden előtétnek a DALI vonalon — panic-off vagy takarítási előbeállítás egy Modbus írással       |
| Mind — Power-on szint beállítása       | Új power-on szintet (0–100 %) broadcast minden előtétnek — az a szint, amelyre visszatérnek a DALI busz bekapcsolása után |
| Mind — System-failure szint beállítása | Új system-failure szintet (0–100 %) broadcast minden előtétnek — az a szint, amelyet a DALI busz hibája esetén felvesznek |

Olvasás (modul)

```taphome
failRegister := modbusr(H, base_modifier + 0, Uint16) + 
(modbusr(H, base_modifier + 1, Uint16) << 16) +
(modbusr(H, base_modifier + 2, Uint16) << 32) +
(modbusr(H, base_modifier + 3, Uint16) << 48)
```

Szerviz műveletek

All - On

```taphome
modbusw(H, base_modifier + 6801, uint16, 1);
```

All - Off

```taphome
modbusw(H, base_modifier + 6801, uint16, 0);
```

All - Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
modbusw(H, base_modifier + 6812, uint16, Lvl);
```

All - Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
modbusw(H, base_modifier + 6813, uint16, Lvl);
```

ECG 0 Fényerőszabályzó Olvasás és írás

Egyedi DALI előtét a 0 rövid címen — dimmer aktuális szint visszajelzéssel, előtét/lámpa hibaállapottal, arc power írással és ECG-szintű fade time/rate, power-on / system-failure szint konfigurációval

Regiszter: H:6 → H:15 UInt16 Egység: % numeric

Szerviz attribútumok

|                      |                                                                                                                                                                     |
|----------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Fő eszköztípus       | DALI eszköztípus — Fluorescent (0), Emergency (1), Discharge (2), Halogen (3), Incandescent (4), Digital signal (5), LED (6), Switching (7) vagy Colour Control (8) |
| Power-on szint       | Az a szint (0–100 %), amelyre az előtét a DALI busz bekapcsolása után visszatér                                                                                     |
| System-failure szint | Az a szint (0–100 %), amelyet az előtét a DALI busz hibája esetén felvesz                                                                                           |
| Fade Time            | DALI fade-time index (0–15) — a célszint eléréséhez szükséges idő közvetlen arc power írásnál                                                                       |
| Fade Rate            | DALI fade-rate index (1–15) — step up / step down parancsok sebessége                                                                                               |

Szerviz műveletek

|                                 |                                                                                                                    |
|---------------------------------|--------------------------------------------------------------------------------------------------------------------|
| Power-on szint beállítása       | Új power-on szintet (0–100 %) ír erre az ECG-re                                                                    |
| System-failure szint beállítása | Új system-failure szintet (0–100 %) ír erre az ECG-re                                                              |
| Fade Time beállítása            | Új DALI fade-time indexet (0–15) ír erre az ECG-re                                                                 |
| Fade Rate beállítása            | Új DALI fade-rate indexet (1–15) ír erre az ECG-re                                                                 |
| Hozzáadás DALI csoporthoz       | Hozzárendeli ezt az ECG-t egy DALI csoporthoz (0–15), hogy a csoport broadcast dimmeren keresztül legyen címezhető |
| Eltávolítás DALI csoportból     | Eltávolítja ezt az ECG-t a megadott DALI csoportból (0–15)                                                         |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 1 Fényerőszabályzó Olvasás és írás

Regiszter: H:106 → H:115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 2 Fényerőszabályzó Olvasás és írás

Regiszter: H:206 → H:215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 3 Fényerőszabályzó Olvasás és írás

Regiszter: H:306 → H:315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 4 Fényerőszabályzó Olvasás és írás

Regiszter: H:406 → H:415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 5 Fényerőszabályzó Olvasás és írás

Regiszter: H:506 → H:515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 6 Fényerőszabályzó Olvasás és írás

Regiszter: H:606 → H:615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 7 Fényerőszabályzó Olvasás és írás

Regiszter: H:706 → H:715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 8 Fényerőszabályzó Olvasás és írás

Regiszter: H:806 → H:815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 9 Fényerőszabályzó Olvasás és írás

Regiszter: H:906 → H:915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 10 Fényerőszabályzó Olvasás és írás

Regiszter: H:1006 → H:1015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 11 Fényerőszabályzó Olvasás és írás

Regiszter: H:1106 → H:1115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 12 Fényerőszabályzó Olvasás és írás

Regiszter: H:1206 → H:1215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 13 Fényerőszabályzó Olvasás és írás

Regiszter: H:1306 → H:1315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 14 Fényerőszabályzó Olvasás és írás

Regiszter: H:1406 → H:1415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 15 Fényerőszabályzó Olvasás és írás

Regiszter: H:1506 → H:1515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 16 Fényerőszabályzó Olvasás és írás

Regiszter: H:1606 → H:1615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 17 Fényerőszabályzó Olvasás és írás

Regiszter: H:1706 → H:1715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 18 Fényerőszabályzó Olvasás és írás

Regiszter: H:1806 → H:1815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 19 Fényerőszabályzó Olvasás és írás

Regiszter: H:1906 → H:1915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 20 Fényerőszabályzó Olvasás és írás

Regiszter: H:2006 → H:2015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 21 Fényerőszabályzó Olvasás és írás

Regiszter: H:2106 → H:2115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 22 Fényerőszabályzó Olvasás és írás

Regiszter: H:2206 → H:2215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 23 Fényerőszabályzó Olvasás és írás

Regiszter: H:2306 → H:2315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 24 Fényerőszabályzó Olvasás és írás

Regiszter: H:2406 → H:2415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 25 Fényerőszabályzó Olvasás és írás

Regiszter: H:2506 → H:2515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 26 Fényerőszabályzó Olvasás és írás

Regiszter: H:2606 → H:2615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 27 Fényerőszabályzó Olvasás és írás

Regiszter: H:2706 → H:2715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 28 Fényerőszabályzó Olvasás és írás

Regiszter: H:2806 → H:2815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 29 Fényerőszabályzó Olvasás és írás

Regiszter: H:2906 → H:2915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 30 Fényerőszabályzó Olvasás és írás

Regiszter: H:3006 → H:3015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 31 Fényerőszabályzó Olvasás és írás

Regiszter: H:3106 → H:3115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 32 Fényerőszabályzó Olvasás és írás

Regiszter: H:3206 → H:3215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 33 Fényerőszabályzó Olvasás és írás

Regiszter: H:3306 → H:3315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 34 Fényerőszabályzó Olvasás és írás

Regiszter: H:3406 → H:3415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 35 Fényerőszabályzó Olvasás és írás

Regiszter: H:3506 → H:3515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 36 Fényerőszabályzó Olvasás és írás

Regiszter: H:3606 → H:3615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 37 Fényerőszabályzó Olvasás és írás

Regiszter: H:3706 → H:3715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 38 Fényerőszabályzó Olvasás és írás

Regiszter: H:3806 → H:3815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 39 Fényerőszabályzó Olvasás és írás

Regiszter: H:3906 → H:3915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 40 Fényerőszabályzó Olvasás és írás

Regiszter: H:4006 → H:4015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 41 Fényerőszabályzó Olvasás és írás

Regiszter: H:4106 → H:4115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 42 Fényerőszabályzó Olvasás és írás

Regiszter: H:4206 → H:4215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 43 Fényerőszabályzó Olvasás és írás

Regiszter: H:4306 → H:4315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 44 Fényerőszabályzó Olvasás és írás

Regiszter: H:4406 → H:4415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 45 Fényerőszabályzó Olvasás és írás

Regiszter: H:4506 → H:4515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 46 Fényerőszabályzó Olvasás és írás

Regiszter: H:4606 → H:4615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 47 Fényerőszabályzó Olvasás és írás

Regiszter: H:4706 → H:4715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 48 Fényerőszabályzó Olvasás és írás

Regiszter: H:4806 → H:4815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 49 Fényerőszabályzó Olvasás és írás

Regiszter: H:4906 → H:4915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 50 Fényerőszabályzó Olvasás és írás

Regiszter: H:5006 → H:5015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 51 Fényerőszabályzó Olvasás és írás

Regiszter: H:5106 → H:5115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 52 Fényerőszabályzó Olvasás és írás

Regiszter: H:5206 → H:5215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 53 Fényerőszabályzó Olvasás és írás

Regiszter: H:5306 → H:5315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 54 Fényerőszabályzó Olvasás és írás

Regiszter: H:5406 → H:5415 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 55 Fényerőszabályzó Olvasás és írás

Regiszter: H:5506 → H:5515 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 56 Fényerőszabályzó Olvasás és írás

Regiszter: H:5606 → H:5615 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 57 Fényerőszabályzó Olvasás és írás

Regiszter: H:5706 → H:5715 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 58 Fényerőszabályzó Olvasás és írás

Regiszter: H:5806 → H:5815 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 59 Fényerőszabályzó Olvasás és írás

Regiszter: H:5906 → H:5915 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 60 Fényerőszabályzó Olvasás és írás

Regiszter: H:6006 → H:6015 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 61 Fényerőszabályzó Olvasás és írás

Regiszter: H:6106 → H:6115 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 62 Fényerőszabályzó Olvasás és írás

Regiszter: H:6206 → H:6215 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

ECG 63 Fényerőszabályzó Olvasás és írás

Regiszter: H:6306 → H:6315 UInt16 Egység: % numeric

Szerviz attribútumok

|                           |
|---------------------------|
| Main Device Type          |
| Power On Level \[%]       |
| System Failure Level \[%] |
| Fade Time                 |
| Fade Rate                 |

Szerviz műveletek

|                          |
|--------------------------|
| Set Power-on Level       |
| Set System-failure Level |
| Set Fade Time            |
| Set Fade Rate            |
| Add to DALI Group        |
| Remove from DALI Group   |

Olvasás (modul)

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
int shift := floor(SA / 32);

if(getbit(failRegister >> 32*shift,SA - 32*shift) = 1, adderror("DALI communication error, Ballast/Lamp Failure"));
if(getbit(status,0) = 1, adderror("Ballast Fail"));
if(getbit(status,1) = 1, adderror("Lamp Fail"));
#if(getbit(status,2) = 1, addwarning("Lamp Power On"));
if(getbit(status,3) = 1, addwarning("Ballast Limit"));
if(getbit(status,4) = 1, addinfo("Fade Run"));
if(getbit(status,5) = 1, addwarning("Reset"));
if(getbit(status,6) = 1, adderror("Missing Short Address"));
if(getbit(status,7) = 1, addwarning("Power Cycle"));
```

Inicializálás

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 4, uint16, 1);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);
```

Szint olvasása

```taphome
var base := base_modifier + (100 * SA);
status := modbusr(H, base + 5, uint16);
level := modbusr(H, base + 6, uint16);
minLevel := modbusr(H, base + 9, uint16);
maxLevel := modbusr(H, base + 10, uint16);

# fade run or updating values or <=1% diff
var diff := abs(level - Le * 100);
if getbit(status,4) or (diff > 0 and diff <= 1) or count > 0
	count := count -1;
	return(le);
else
	if level = 0
		return(0);
	else
		return(linear(level, minLevel, if(minLevel=0, 0, 0.01), maxLevel, 1));
	end
end
```

Szint írása

```taphome
var base := base_modifier + (100 * SA);
if !isnull(Le)
	count := 2;
	if le = 0
		modbusw(H, base + 15, uint16, 0);
	else
		modbusw(H, base + 15, uint16, linear(le, if(minLevel=0, 0, 0.01), minLevel, 1, maxLevel));
	end
end
#trigger update
modbusw(H, base + 4, uint16, 1);
```

Szerviz attribútumok

Main Device Type

```taphome

var base := base_modifier + (100 * SA);

switch(modbusr(H, base + 7, uint16),
0, "Fluorescent",
1, "Emergency",
2, "Discharge",
3, "Halogen",
4, "Incandescent",
5, "Digital signal",
6, "LED",
7, "Switching",
8, "Color control",
255, "Other",
"Unknown")
```

Power On Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 11, uint16);
```

System Failure Level \[%]

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 12, uint16);
```

Fade Time

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 13, uint16);
```

Fade Rate

```taphome
var base := base_modifier + (100 * SA);
modbusr(H, base + 14, uint16);
```

Szerviz műveletek

Set Power-on Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 27, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set System-failure Level

Paraméterek: Level (0–100 Lvl)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 28, uint16, Lvl);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Time

Paraméterek: Fade Time (0–15 FT)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 23, uint16, FT);
modbusw(H, base + 4, uint16, 1);
```

Set Fade Rate

Paraméterek: Fade Rate (1–15 FR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 24, uint16, FR);
modbusw(H, base + 4, uint16, 1);
```

Add to DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 29, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

Remove from DALI Group

Paraméterek: Group (0–15 GR)

```taphome
var base := base_modifier + (100 * SA);
modbusw(H, base + 30, uint16, GR);
modbusw(H, base + 4, uint16, 1);
```

DALI csoport 0 Fényerőszabályzó Olvasás és írás

Csak írható broadcast dimmer a DALI 0 csoporthoz rendelt összes ECG-re — nincs olvasási visszajelzés, a TapHome csak a felhasználói bemenetből követi a szintet

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 1 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 2 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 3 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 4 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 5 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 6 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 7 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 8 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 9 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 10 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 11 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 12 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 13 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 14 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

DALI csoport 15 Fényerőszabályzó Olvasás és írás

UInt16 Egység: % numeric

Szint írása

```taphome
if !isnull(Le)
	modbusw(H, (20 * GA) + 6400 + base_modifier, uint16, Le * 100);
end
```

**Kapcsolat:** Modbus RTU • 9600 baud• 8N1 • Slave ID: $\[SlaveId]

Lehetséges fejlesztések (40)

- H:6800 Broadcast Arc Power Level — Write 0–100 % to set every ballast on the DALI line to the same arc power level — not exposed as an action; only per-group (6400+20\*GR) and All On/Off (6801) are wired up
- H:6802 Broadcast Step Down / Up — 0 = Step Down, 1 = Step Up applied to all ECGs on the line (step size controlled by each ECG's Fade Rate)
- H:6803 Broadcast Recall Min Level — Write 1 → every ballast jumps to its individually configured Min Level
- H:6804 Broadcast Recall Max Level — Write 1 → every ballast jumps to its individually configured Max Level
- H:6805 Broadcast Go to Scene — Write 0–15 to recall a DALI scene on every ballast (scenes pre-configured in MAPS or via Set Scene action per ECG)
- H:6806 Broadcast Store Current Level as Scene — Write 0–15 to save the current arc power level of every ballast into the selected scene slot
- H:6807 Broadcast Clear/Remove Scene — Write 0–15 to erase the selected scene on every ballast
- H:6808 Broadcast Set Fade Time — Write 0–15 to apply the same fade-time index to every ballast (faster than per-ECG configuration for uniform fades)
- H:6809 Broadcast Set Fade Rate — Write 1–15 to apply the same fade-rate index to every ballast
- H:6810 Broadcast Set Min Level — Write 0–100 % to set the same minimum dim level on every ballast
- H:6811 Broadcast Set Max Level — Write 0–100 % to set the same maximum dim level on every ballast
- H:6814 Broadcast Multicontrol — Compound register — 0=Off, 1=100%, 2=StpUp, 3=StpDwn, 1XX=GoScene(XX), 2XX=StoreScene, 3XX=RmvScene, 1XXX=FdRate, 2XXX=FdTime, 3XXX=MinLvl, 4XXX=MaxLvl, 5XXX=PwrOnLvl, 6XXX=SysFailLvl; enables 'one-write many-ops' for advanced BMS scripting
- H:SA+8 Physical Minimum Level (per ECG) — Hardware-defined minimum dim level per ballast (distinct from user-settable Min Level at +9); read-only
- H:SA+16 Arc Power Off/On (per ECG) — R/W toggle: 0 = Off, 1 = 100 %; TapHome writes arc power level at +15 instead which covers the same capability
- H:SA+17 Step Down/Up (per ECG) — 0 = Step Down, 1 = Step Up — relative dimming per ballast using the stored fade-rate
- H:SA+18 Recall Min Level (per ECG) — Write 1 → this ECG jumps to its Min Level
- H:SA+19 Recall Max Level (per ECG) — Write 1 → this ECG jumps to its Max Level
- H:SA+20 Go to Scene (per ECG) — 0–15 scene recall per ballast
- H:SA+21 Store Current Level as Scene (per ECG) — 0–15 scene save per ballast
- H:SA+22 Clear/Remove Scene (per ECG) — 0–15 scene clear per ballast
- H:SA+25 Set Min Level (per ECG) — 0–100 %; R/W — TapHome reads current min via service attribute Fade Time but does NOT expose a writer for minLevel (template caches the read value into minLevel variable for writelevel linear mapping)
- H:SA+26 Set Max Level (per ECG) — 0–100 %; mirror of the above for maxLevel
- H:SA+31 Multicontrol (per ECG) — Compound write (see Broadcast Multicontrol for encoding) — advanced single-register scripting entry-point per ECG
- H:6401+20\*GR Group Arc Power Off/On — Group-wide 0/100 % toggle; template only exposes Arc Power Level (group writelevel), so ON/OFF is achievable only by writing 0 or 100
- H:6402+20\*GR Group Step Down/Up — Relative dim per group
- H:6403+20\*GR Group Recall Min Level
- H:6404+20\*GR Group Recall Max Level
- H:6405+20\*GR Group Go to Scene — 0–15
- H:6406+20\*GR Group Store Current Level as Scene — 0–15
- H:6407+20\*GR Group Clear/Remove Scene — 0–15
- H:6408+20\*GR Group Set Fade Time — 0–15
- H:6409+20\*GR Group Set Fade Rate — 1–15
- H:6410+20\*GR Group Set Min Level — 0–100 %
- H:6411+20\*GR Group Set Max Level — 0–100 %
- H:6412+20\*GR Group Set Power-on Level — 0–100 %
- H:6413+20\*GR Group Set System-failure Level — 0–100 %
- H:SA+42..+73 Emergency Control Gear (EML) signals — Failure Status, Emergency Mode, Battery Charge, Function/Duration test control, Rated Duration, Prolong Time, Store* parameters — Entire DALI Emergency (Part 202) feature set: SA+42 Failure Status, +43 Emergency Mode, +44 Emergency Status, +45 Battery Charge %, +46..+49 test schedule, +50..+57 timing/level config, +60..+68 trigger writes (Rest, Inhibit, Start/Stop tests, Reset Lamp Time), +69..+73 Store* R/W settings; ECGs of type 1 (Emergency) in this template fall back to the generic Fluorescent/LED script, so none of these are surfaced — dedicated EML template would be needed
- H:SA+80..+93 LED Control Gear (Device Type 6) signals — Failure Status bitmask, Gear Type, Dimming Curve, Operating Modes, Reference Running, Current Protector, Fast Fade Time, Enable/Disable Current Protector, Select Dimming Curve, Store Fast Fade Time — Advanced LED diagnostics and tuning per DALI-2 Part 207; template uses only the common signals (0..28) so LED-specific bits are not exposed even though gateway supports them
- 14000 + 640\*LINE + 10\*IDX + INSTANCE + 1280\*SIG DALI Input Devices (Occupancy, Light sensors, Push buttons, Absolute inputs) — Gateway supports up to 64 DALI input devices per line (recommended 16 with push buttons) — occupancy (0/1/2/3), light level (lux), push-button event bitmask (press/release/short/double/long), absolute input (0–100 % / raw); template exposes NO input devices. Local management (gateway directly drives ECGs from push-button events) is also unused. This is the largest feature gap for IBOX-MBS-DALI integrations that use DALI-native sensors
- H:SA+29 (Add to DALI Group), H:SA+30 (Remove from DALI Group) Add/Remove DALI Group (per ECG) — Firmware-drift deprecation: the r1.5 manual (May 2024) marks signals 29–30 as 'Not used' in the common-signals table, but the TapHome template still exposes them as per-ECG service actions ('Add to DALI Group' / 'Remove from DALI Group') because they were functional on earlier firmware where this template was authored. Behavior on latest firmware should be verified before relying on group-membership-at-runtime writes; configure groups via Intesis MAPS commissioning instead for stable deployments

## Importálási paraméterek

Ezeket az értékeket az XML importálásakor adja meg.

| Az alkalmazás kéri | Alapérték     |
|--------------------|---------------|
| Slave Id           | `1`           |
| IP address         | `192.168.1.0` |

## Források

- Intesis Modbus Server – DALI User Manual (r1.5, 2024)
  
  [www.hms-networks.com](https://www.hms-networks.com/docs/default-source/products/intesis/manuals-and-guides---manuals/user-manual-inmbsdalxxx0000.pdf) 2026-04-24
  
  [PDF](https://taphome.com/compatibility/devices/intesis-dali/manufacturer/user-manual.pdf)
- IBOX-MBS-DALI Installation Sheet (rev. 1.5)
  
  [cdn.chipkin.com](https://cdn.chipkin.com/assets/uploads/2019/Oct/intesisbox_ibox-mbs-dali_installation_manual_en_14-15-15-02.pdf) 2026-04-24
  
  [PDF](https://taphome.com/compatibility/devices/intesis-dali/manufacturer/installation-manual.pdf)

A gyártói dokumentumok © a mindenkori tulajdonosaikat illetik. A gyártó által közzétett formában, kizárólag tájékoztatásul tesszük elérhetővé őket.

## Kapcsolódó dokumentáció

- [Modbus Integration](https://taphome.com/hu/compatibility/modbus-guide/)
- [Modbus útmutató a TapHome készülékekhez](https://taphome.com/hu/docs/integration/modbus/)
- [Egyszerű konfiguráció sablonok használatával](https://taphome.com/hu/docs/integration/modbus/templates/)
- [Modbus szkriptek és prefetch](https://taphome.com/hu/docs/script/modbus-scripts/)
- [Modbus függvények](https://taphome.com/hu/docs/script/modbus/)
- [Modbus adattípusok](https://taphome.com/hu/docs/script/modbus-data-types/)

## Hibaelhárítás

A témához kapcsolódó gyakori problémák:

- [A DALI lámpák maguktól bekapcsolnak](https://taphome.com/hu/troubleshooting/wiring/dali-lights-switch-on-by-themselves/) — A DALI átjáró mögötti DALI lámpák parancs nélkül minimális fényerőn bekapcsolnak vagy fényerőt váltanak, általában minden alkalommal ugyanaz a néhány lámpa. A busz egy pillanatra zavart kap — az átjárótól, egy leágazás rövidzárlatától vagy feszültségeséstől.

[Összes hibaelhárítási cikk megtekintése](https://taphome.com/hu/troubleshooting/)