Search
MENU
- • Requirements for the controlled devices
- • Dashboards, Zones, Categories
- • Simple thermostat with hysteresis
- • Simple Heating management using Weekly schedule and Presence switch
- • Power limiting
- • Notification on high temperature (DEPRECATED)
- • Configuring hysteresis control via Equation Smart Rule
- • PID Temperature regulation
- • PID Cascade
- • Regulation of Boiler Cascade
- • Equithermic regulation
- • Heating control in high electricity tariff via load management tariff indicator input
- • Heating and Cooling modes
- • Editing multiple devices
- • Integrate multiple control units Core
- • Safe values
- • How to combine two daily schedules in one day
- • Grouping or linking devices together
- • Using statistic values in Smart Rules
- • Hot water circulation pump control
- • Exporting data from TapHome into Google Spreadsheet using Integromat
- • Exporting device descriptions
- • 2022.2
- • 2022.1
- • 2021.3
- • 2021.2
- • 2021.1
- • 2020.1
- • 2019.1
- • 2018.1
- • 2017.1 - Blinds automation - angle control update
- • 2017.1 - Blinds automation - Depth of sun rays
- • 2017.1 - Charts updated
- • 2017.1 - Core update from the app
- • 2017.1 - Double click and triple click
- • 2017.1 - Expose devices
- • 2017.1 - Multi-value switch
- • 2017.1 - Permissions
- • 2017.1 - Replace module action
- • 2017.1 - Set to Automatic mode - "Push buttons event" Smart Rule
- • 2017.1 – Daily schedule Smart Rule
- • Firmware changelog
- • Transition of MAC address handling
- Documentation
- Integration into TapHome
- Packet parser (HTTP, TCP, UDP, FTP, MQTT)
- Hunter Douglas PowerView Hub
Hunter Douglas PowerView Hub
How to add a PowerView Hub device to the TapHome application
.jpeg?version=1&modificationDate=1601629200620&cacheVersion=1&api=v2&width=113&height=193)
.jpeg?version=1&modificationDate=1601629256435&cacheVersion=1&api=v2&width=113&height=193)
- Connect a PowerView Hub device to your local network. In PowerView app, set static IP address of the Hub (Hub->Hub Info->Static IP->Use Static IP=ON)
- In the Taphome app create Packet parser interface or open the existing one.
- Click the “Add from template” button and choose the PowerView Hub template.
- Find out an IP address of the PowerView Hub.
- Enter the IP address.
- Click the “Create” button.
- Find out an ID of your roller/blinds by entering the URL http://(IP_address)/api/shades in any browser, where (IP_address) is the IP address of your PowerView Hub. Attribute “shadeIds” contains an ID.
Example
"shadeIds":[7348]
Warning: there can be more than one ID in the “shadeIds” field if you have more than one roller/blinds.
- Open Service Settings of the created device in the TapHome app.
- Enter the ID number into the field Device ID.
- Save settings.
- Restart TapHome Core control unit.