---
title: "Default Values and Manual Override"
description: "What a device does when a smart rule releases it: stays as it is, goes to a set value or back to the last manual one. Manual override and safety mode."
url: "https://taphome.com/en/docs/smart-rules/default-values/"
language: en
lastmod: 2026-11-01
generator: hugo
ai:
  topics: ["smart-rules","default-values","manual-override","operation-mode","priority","safety-mode"]
  questions: ["What happens to a device when a smart rule stops controlling it?","Why does the light stay on after the automation ends?","How do I make the light turn off after the automation ends?","Who wins when several smart rules and a manual change want to control a device at the same time?","What is the difference between the options Do not change, Set to value and Last manual value?","When are default values applied?","How long does a manual change of a device last?","How do I turn a device off automatically some time after it is switched on?","How do I disable a smart rule for just one device?","Can safety mode be overridden manually?"]
---

# Default Values and Manual Override

Last updated: 2026-11-01

> [!NOTE]
> 🚀 **Available** — TapHome Next 2026.1.36599+.

When a smart rule stops controlling a device, its **Default values** decide what happens: the device stays as it is, changes to a value you set, or returns to the last value from a manual change.

> [!WARNING]
> All devices have their **Default values** set to **Do not change** until you change them — lights and blinds too. A light that the automation turned on therefore stays on after the automation ends. To make it turn off, choose **Set to value** for the light and enter 0%.


## Who controls the device

Each value type of a device — state, brightness, blind position, slat angle — is decided separately, in this order:

1. **Safety mode** — a smart rule action in **Safety** mode overrides everything else.
2. **A manual change** from the app or directly on the device — switches the value type to manual mode; [manual override](https://taphome.com/en/docs/smart-rules/default-values/#manual-override) determines when the automation may change it again.
3. **Smart rule actions** by priority — a higher smart rule that holds the value wins, and a lower one may change only the value types that the higher one does not hold. This also applies to an action in **Manual** mode, such as a push button: when a smart rule with a higher priority holds the value type, the action is not applied. The priority is set by the order in the device's detail, in the **Affected by** section; you change it with the **Edit** button.
4. **Default values** — when no one holds the value type.

That is why, when you tilt the slats manually, only the slats switch to manual mode, while the smart rule keeps controlling the blind position. A manual change of the position switches the slats to manual mode too.


## **Default values**

You set them in the device's detail with the **Default values** row, which is always the last one in the **Affected by** section; only a user who may edit the device's service settings can change them. For a device with several value types, the dialog first offers one option for all of them, until you tap **Show more** to split them by value type.



In the chart, grey lanes show what controls the light (dot = manual change, bar = the time a smart rule holds it), and blue lanes show the brightness of the light with each of the three options; the lane height is 0–100%. The time axis is not to scale.



1. A manual change sets the brightness to 40%.
2. A new smart rule action ends manual mode, because by default the manual override of lights is set to **Keep manual mode until next automatic change**.
3. The smart rule releases the light. **Do not change** writes nothing: the light stays on in automatic mode. With **Set to value**, the light shows the **Default value** mode. **Last manual value** restores 40% as a manual change: the light switches to manual mode, and [manual override](https://taphome.com/en/docs/smart-rules/default-values/#manual-override) applies to it, including its time. If there has been no manual change yet, it writes nothing.

A default value is applied when no smart rule holds the value type, that is, when the smart rule has released the device (none of its triggers applies), has been disabled (for all devices or only for this one), is blocked by a limiting condition, has been deleted, or has sent only a one-time action, which does not hold the value. A default value does not end manual mode — it is applied only once manual mode ends according to [manual override](https://taphome.com/en/docs/smart-rules/default-values/#manual-override), or once a smart rule switches the device to automatic mode, for example **Automatic turn off** in the **Light Controller** smart rule; with the **Keep manual mode until ended by user** option, the smart rule cannot do that. That is why a default value of 0% does not by itself turn off a light that was turned on manually or with a push button in the **Condition** smart rule.

The **Keep default values** smart rule is a different mechanism: an ordinary automatic smart rule that holds the values, so while it runs, the device's default values are not applied.


## **Manual override**

A manual change is a change from the app, directly on the device (for example with its own switch), from outside through [exposed devices](https://taphome.com/en/docs/expose-devices/) (for example KNX, Modbus or Alexa), and a smart rule action in **Manual** mode. Push buttons work in this mode by default: a short or long press in the **Light Controller** and **Control blinds with push buttons** smart rules, and in the **Condition** smart rule with a button press trigger. You change the mode of an action with the **Select mode** option on the action page, where the app offers it (for example in the **Condition** smart rule); the built-in actions of push buttons have a fixed mode.

What the automation may do after a manual change is set in the device's detail with the **Manual override** button in the bottom bar:



- **Keep manual mode for a limited time** — when the time runs out, all value types of the device return to automatic mode at once.
- **Keep manual mode for a limited time and then until next automatic change** — after the time runs out, manual mode continues as with the next option.
- **Keep manual mode until next automatic change** — only a new smart rule action ends manual mode. A smart rule that holds the value with the same action as before the manual change does not end it, and neither does a smart rule with a lower priority while a higher one holds the value.
- **Keep manual mode until ended by user** — even the smart rule action **Switch to automatic mode** is rejected.
- **Overriding automatic mode or default value is disabled** — rejects a manual change, push buttons included, not only when a smart rule holds the value type, but also when the value type has the default value **Set to value**.
- **Do not allow manual mode** — also rejects push buttons and the **Last manual value** option; a device that is in manual mode at that moment switches to automatic mode once you save the option.

A device without this setting has **Keep manual mode until next automatic change**. When you add a virtual device or change the device type, the app pre-fills the option by type — for example, a circulation pump gets **Keep manual mode for a limited time** with a time of 15 minutes.

The manual override setting and its time are shared by all value types of the device. When manual mode ends, the device is taken over by the smart rule that holds it, otherwise by its **Default values**.

A smart rule action that sets several value types at once is performed in full or not at all: while the manual override time runs, and always with the **Keep manual mode until ended by user** option, the device rejects the whole action — for example, after a manual brightness change, a light rejects an action with both brightness and color temperature. The device log does not record a rejected action; only its row in the **Affected by** section turns gray. The **Manual control** row stays in the same section with the **Active** chip even after the device returns to automatic mode: it is the memory of the last manual values, not manual mode.


## Turning a device off automatically after it is switched on

A device has no separate "turn off after" setting, and a smart rule cannot do it either: in the **Delay** and **Condition** smart rules, the trigger device cannot be an action target. Two settings in the device's detail do it together:

1. **Default values** → **Set to value** → off (0% for a light).
2. **Manual override** → **Keep manual mode for a limited time**, with the time after which the device should turn off, for example 20 minutes.

Each manual change, whether from the app, on the device, through exposed devices or with a push button, starts the time again. When it runs out, the device returns to automatic mode and, if no smart rule holds it, the default value turns it off. With **Keep manual mode for a limited time and then until next automatic change**, the device stays on after the time. A switch-on by an automatic smart rule action is not a manual change: the device turns off according to that smart rule.

## Disabling a smart rule for one device

In the device's detail, in the **Affected by** section, tap the three dots next to the smart rule and select **Disable on this device**. The item is offered only when the smart rule is enabled and you are allowed to edit it; **Disable** in the same menu disables the smart rule for all devices.



The smart rule row then shows the status **Disabled on this device**, and you enable the smart rule again with the **Enable on this device** item.


## **Safety mode**

An action works in safety mode when you choose **Safety** for it with the **Select mode** option. The **Protect blinds from wind** smart rule uses it by itself while the wind speed exceeds the strong wind threshold; once the wind speed no longer exceeds it, the smart rule works in automatic mode. A device in safety mode shows **Safety mode**, and neither a manual change nor a default value can override it. When safety mode ends, the device is taken over by the highest smart rule that holds it, otherwise by its **Default values**.

If safety mode ends while manual mode is still in effect (the manual override time keeps running during safety mode too), the device stays in manual mode with the safety value — the value of the manual change is not restored.
