Initial Setup explains how to get a new TapHome installation running: you create a TapHome account, add the Core control unit as a new location with the 16-character access token from its label, and connect the modules. It is meant for installers and users setting up a control unit for the first time. The section also covers LED indicators for diagnosing the Core and IO modules, requirements for third-party devices, and the bus analyzer for TapHome bus modules. Use the overview below to open the page for your task.
Documentation
Initial Setup
Last updated:
Setup tasks
5 pages
- 01 Check the requirements third-party devices must meet before you cable and connect them Requirements
- 02 Give the Core and every network device a fixed address and set the MQTT broker address Network Preparation
- 03 Create a TapHome account, add the control unit with its access token and connect the modules First steps
- 04 Find out what an LED state on the Core or an IO module means and what to check LED indicators
- 05 Monitor communication errors on the TapHome bus and find new devices quickly Bus Analyzer