DoorBird

DoorBird is a SIP video doorbell that you connect to TapHome by adding a SIP user in the DoorBird administration and setting the Core as its SIP proxy. It works with the DoorBird app and the SIP server of the Core on UDP port 5060. You need the DoorBird app, the QR code from the manufacturer and the Core IP address from the TapHome app location settings. The result is a doorbell that places a scheduled SIP call to the Core; the page also lists price, design options and simplicity as positives and bad audio quality via SIP as a negative.

Positives#

• Price
• Design options
• Simplicity
• Proprietary cloud app

Negatives#

• Bad audio quality via SIP

Setup Instructions#

Step 1: Initial Configuration#

Install the DoorBird app and follow administrative setup instructions by scanning the QR code provided by the manufacturer.

In the administration page, access SIP Calls and add at least one user.

Step 2: Define SIP User#

Set the Name to any value (example: “CallMe”) for later reference.

Configure SIP address format: nnn@Core IpAddress:5060 where:

• nnn = SIP number sent to Core SIP server
• Core IpAddress = Core IP (found in TapHome app location settings)
• 5060 = SIP UDP port

Step 3: Schedule Doorbell#

Navigate to Schedule section. Select SIP call from left menu, choose the user created previously, and set activation times.

Step 4: SIP Settings#

Activate SIP and set SIP proxy to TapHome Core IP address.

Step 5: Allowed SIP Users#

Add user with phone number 111 and TapHome Core IP address.

Save all changes when prompted.

Resources#

• Producer User Manual
• Installation Video

See also — Configuration in TapHome, 2N SIP Video Doorbell.