---
title: "DMX"
description: "Connect the TapHome DMX Gateway to any TapHome BUS terminal, find it with a bus scan and add DMX devices in the app, step by step."
url: "https://taphome.com/en/docs/integration/dmx/"
language: en
lastmod: 2026-11-06
generator: hugo
ai:
  topics: ["dmx","dmx-gateway","taphome-bus","device-integration","lighting-control"]
  questions: ["How do I connect DMX Gateway to TapHome?","Where do I configure DMX Gateway in TapHome app?","How do I add a new DMX device in TapHome?","What is DMXG in TapHome Bus settings?","Can I connect DMX Gateway to the same terminal as other TapHome modules?","How do I scan for DMX devices in TapHome?"]
---

# DMX

Documentation for integrating DMX into TapHome via the TapHome DMX Gateway, including connection steps and setup procedures within the application.

Last updated: 2026-11-06

To connect DMX to TapHome, plug the DMX Gateway into any TapHome BUS terminal, where it can share the terminal with other TapHome modules. The terminal must be linked to the TapHomeBus CCU in the Hardware settings page of the app. You then run the '**Find new devices**' scan in the TapHome Bus settings, open the DMXG device and add DMX devices with '+ **Add device**'. The added DMX devices then appear in TapHome.

## STEP 1: Connect DMX Gateway to TapHome BUS

Connect the DMX Gateway to any TapHome BUS terminal. It can be at the terminal along with other TapHome modules.

## STEP 2: Set up DMX Gateway within TapHome application

**2a)** Make sure that terminal is linked to TapHomeBus CCU within the Hardware settings page

![DMX hardware settings](https://taphome.com/documentation/compatibility/dmx-hardware-settings.png)

**2b)** Start '**Find new devices**' scan within TapHome Bus settings page

![DMX find devices](https://taphome.com/documentation/compatibility/dmx-find-devices.png)

**2c)** After successful scan open DMXG device within TapHome Bus settings page

![DMX device configuration](https://taphome.com/documentation/compatibility/dmx-device-config.png)

**2d)** Use "+ **Add device**" to add new DMX device

![DMX add device](https://taphome.com/documentation/compatibility/dmx-add-device.png)

**2e)** The result

![DMX result 1](https://taphome.com/documentation/compatibility/dmx-result-1.png)

![DMX result 2](https://taphome.com/documentation/compatibility/dmx-result-2.png)

**See also** — [DALI](https://taphome.com/en/docs/integration/dali/), [Lighting](https://taphome.com/en/docs/functional-areas/lighting/).