DMX

To connect DMX to TapHome, plug the DMX Gateway into any TapHome BUS terminal, where it can share the terminal with other TapHome modules. The terminal must be linked to the TapHomeBus CCU in the Hardware settings page of the app. You then run the ‘Find new devices’ scan in the TapHome Bus settings, open the DMXG device and add DMX devices with ‘+ Add device’. The added DMX devices then appear in TapHome.

STEP 1: Connect DMX Gateway to TapHome BUS#

Connect the DMX Gateway to any TapHome BUS terminal. It can be at the terminal along with other TapHome modules.

STEP 2: Set up DMX Gateway within TapHome application#

2a) Make sure that terminal is linked to TapHomeBus CCU within the Hardware settings page

2b) Start ‘Find new devices’ scan within TapHome Bus settings page

2c) After successful scan open DMXG device within TapHome Bus settings page

2d) Use “+ Add device” to add new DMX device

2e) The result

See also — DALI, Lighting.