---
title: "TapHome API"
description: "TapHome API PacketParser template — bridge any TapHome Core device to another TapHome Core via REST API."
url: "https://taphome.com/en/compatibility/taphome-api/"
language: en
lastmod: 2026-03-28
generator: hugo
ai:
  topics: ["http","gateway","rest-api","cloud","local-network"]
  questions: ["How to integrate TapHome API template with TapHome?","What device types does the TapHome API template support?","How to connect two TapHome Cores via API?","How to authenticate TapHome API requests with a bearer token?","What is the difference between cloud and local TapHome API access?","Why does the TapHome API template return cached values?"]
---

# TapHome API

Communication: Packet Parser → HTTP

- [TapHome API Documentation](https://taphome.com/en/support/601227274)

## Integration guide

The TapHome API template is a PacketParser HTTP template that integrates TapHome Core's own REST API back into TapHome. This enables Core-to-Core communication — devices exposed on one TapHome Core can be mirrored as native devices on another Core. The template communicates over HTTPS (cloud via `api.taphome.com:443`) or HTTP (local network via `http://{core-ip}/api/...`), using bearer token authentication.

The template provides 15 unique device types with 15 instances each (225 devices total), covering switches, dimmers, sensors, meters, blinds, lighting, thermostats, and more. Each device reads and writes values using the `getDeviceValue` and `setDeviceValue` endpoints with specific `valueTypeId` parameters.

## Configuration

The TapHome API template requires two configuration parameters:

1. **API token** — generated in the source Core under **Settings > Expose Devices > TapHome API**. The token uses a custom bearer format (`Authorization: TapHome {token}`). Only one token is active at a time — generating a new token invalidates the previous one.

2. **Device ID** — each template device instance maps to a specific device ID on the source Core. Use the discovery endpoint (`/api/TapHomeApi/v1/discovery`) to list all exposed devices with their IDs and supported value types.

The template supports two access modes with identical API structure:

- **Cloud** — `https://api.taphome.com/api/TapHomeApi/v1/` (internet access, works from anywhere)
- **Local network** — `http://{core-ip}/api/TapHomeApi/v1/` (LAN/VPN access, lower latency, requires Core 2021.3+)

> [!TIP]
> Local network access eliminates internet dependency and reduces latency. Assign a static IP or DHCP reservation to the source Core since TapHome Core does not support mDNS discovery.

## Device capabilities

The template covers 15 device types. Each type uses specific ValueType IDs to read and write device state via the API's JSON response (`$.values[?(@.valueTypeId == N)].value`).

### Switching and output control

- **Switch** — binary on/off control via ValueType 48 (SwitchState). Reads and writes `1` (ON) or `0` (OFF).
- **Analog Output** — continuous 0–100 % level via ValueType 42 (AnalogOutputValue). Used for dimmers, valve actuators, or any analog output device.
- **Multi-Value Switch** — numeric mode selector with values 0–9 via ValueType 49. Maps to user-defined states for multi-mode device control.

### Sensors and metering

- **Analog Input** — generic numeric input via ValueType 55 (AnalogInputValue). Read-only.
- **Temperature Sensor** — temperature (°C) via ValueType 5 (RealTemperature) and humidity (%) via ValueType 3. Read-only, 15-second poll interval.
- **Brightness Sensor** — ambient light level (lux) via ValueType 2. Read-only, 15-second poll interval.
- **Wind Speed Sensor** — wind speed (m/s) via ValueType 14. Read-only, 15-second poll interval.
- **Electricity Meter** — cumulative energy (kWh) via ValueType 59 and instantaneous demand (kW) via ValueType 60. Read-only, 15-second poll interval.
- **Reed Contact** — binary open/closed state via ValueType 44. Returns `1` (Open) or `0` (Closed). Read-only.

### Lighting

- **Dual White Light** — brightness (%) via ValueType 65 (HueBrightness) and correlated color temperature via ValueType 89 (CCT).
- **RGB Light** — full HSB color control: hue (0–360°) via ValueType 40, saturation (0–100 %) via ValueType 41, brightness via ValueType 65, and CCT via ValueType 89.

### Climate and covers

- **Thermostat** — reads current temperature (ValueType 5), humidity (ValueType 3), and controls the temperature setpoint (ValueType 6).
- **Blind** — position level (%) via ValueType 46 (BlindsLevel) and tilt angle via ValueType 10 (BlindsSlope).
- **Slide** — position level (%) via ValueType 46 (BlindsLevel). Shares the same ValueType as Blind but without slope control.

### General purpose

- **Variable** — general-purpose numeric variable via ValueType 62 (VariableState). Can represent any custom value in TapHome.

### Service diagnostics

The module exposes one service attribute — **Devices** — which lists all exposed devices with their IDs and types by calling the `/api/TapHomeApi/v1/discovery` endpoint.

Sensor-type devices (Brightness, Variable, Wind Speed) include an additional per-device service attribute — **Value Types** — which lists all ValueType IDs and names available on that specific device.

### Additional capabilities

The TapHome API also exposes several system-level ValueTypes not currently polled by the template: Device Status (ID 7) for device health, Operation Mode (ID 22) and Manual Timeout (ID 23) for manual/automatic mode control. Desired-value variants exist for Analog Output (ID 67), Hue Brightness (ID 68), and Multi-Value Switch (ID 71), as well as a Blinds Is Moving indicator (ID 66). The discovery and location endpoints provide diagnostic information about the Core. Webhook push notifications (300 ms throttle) offer a real-time alternative to polling. These capabilities can be added in a future template update.

## Troubleshooting

### API returns 401 Unauthorized

1. Verify the token is correct and has not been regenerated — generating a new token invalidates all previous tokens
2. Check the authorization header format: `Authorization: TapHome {token}` (note the `TapHome` prefix instead of `Bearer`)
3. Ensure the token belongs to the correct Core location

### API returns 403 Forbidden

The requested device is not exposed via TapHome API. In the source Core, navigate to **Settings > Expose Devices > TapHome API** and verify the device is listed.

### Cached or stale values

The API rate-limits `getDeviceValue` requests to 500 ms intervals. Requests faster than this may return cached values. Compare the `timestamp` field in the response — identical timestamps indicate cached data. Increase the poll interval to at least 1 second.

### Write requests return HTTP 503

The `setDeviceValue` endpoint returns 503 (Service Unavailable) if called more frequently than every 500 ms. Space out write requests or queue them with sufficient delay.

> [!WARNING]
> Regenerating an API token invalidates the previous one for that interface. If another system regenerates the token the template uses (e.g., during Home Assistant setup), the template loses access — so coordinate token usage across integrations that share one interface. On older Core versions a Core exposes a single TapHome API interface with one active token; newer Core (2026.1+) supports multiple interface instances on one Core, each with its own token, so separate integrations can use separate tokens.

## Available devices 225

These devices appear in TapHome after import.

TapHome API Module

Service Attributes

|         |
|---------|
| Devices |

Custom Variables

|                      |                                                                                            |
|----------------------|--------------------------------------------------------------------------------------------|
| `API_token` (string) | TapHome API bearer token for authentication (generate in TapHome app under Settings → API) |

Service Attributes

Devices

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/discovery", "GET", "", "Authorization: TapHome " + API_token);
IF response.IsSuccess
    var max := PARSEJSON(response.content, "$.devices[-1:].deviceId");
    var ret := "";
    var i := 0;
    do
        ret := ret + "(" + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].deviceId", true) + ") ";
        ret := ret + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].name", true);
        ret := ret + " - " + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].type", true);
        ret := ret + "\n";
        i := i + 1;
    loop while i < max
    
    RETURN(ret);
END
```

Analog Input (1) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (1) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (1) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (1) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (1) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (1) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (1) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (1) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (1) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (1) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (1) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (1) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (1) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (1) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (1) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (2) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (2) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (2) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (2) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (2) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (2) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (2) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (2) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (2) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (2) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (2) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (2) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (2) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (2) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (2) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (3) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (3) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (3) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (3) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (3) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (3) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (3) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (3) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (3) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (3) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (3) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (3) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (3) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (3) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (3) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (4) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (4) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (4) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (4) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (4) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (4) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (4) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (4) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (4) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (4) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (4) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (4) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (4) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (4) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (4) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (5) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (5) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (5) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (5) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (5) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (5) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (5) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (5) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (5) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (5) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (5) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (5) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (5) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (5) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (5) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (6) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (6) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (6) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (6) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (6) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (6) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (6) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (6) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (6) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (6) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (6) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (6) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (6) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (6) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (6) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (7) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (7) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (7) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (7) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (7) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (7) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (7) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (7) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (7) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (7) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (7) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (7) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (7) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (7) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (7) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (8) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (8) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (8) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (8) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (8) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (8) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (8) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (8) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (8) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (8) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (8) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (8) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (8) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (8) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (8) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (9) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (9) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (9) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (9) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (9) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (9) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (9) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (9) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (9) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (9) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (9) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (9) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (9) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (9) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (9) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (10) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (10) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (10) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (10) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (10) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (10) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (10) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (10) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (10) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (10) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (10) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (10) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (10) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (10) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (10) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (11) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (11) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (11) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (11) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (11) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (11) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (11) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (11) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (11) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (11) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (11) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (11) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (11) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (11) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (11) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (12) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (12) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (12) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (12) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (12) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (12) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (12) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (12) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (12) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (12) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (12) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (12) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (12) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (12) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (12) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (13) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (13) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (13) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (13) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (13) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (13) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (13) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (13) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (13) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (13) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (13) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (13) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (13) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (13) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (13) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (14) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (14) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (14) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (14) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (14) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (14) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (14) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (14) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (14) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (14) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (14) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (14) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (14) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (14) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (14) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Input (15) Analog Input Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read input level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Analog Output (15) Dimmer Read and write

Continuous output level (0-100 %) for dimmers, valve actuators, or analog output devices

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Switch (15) Switch Read and write

numeric json\_path

Values / States: ON · OFF

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Dual White Light (15) White Light Read and write

Brightness and correlated color temperature (CCT) control for tunable white lighting

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Electricity Meter (15) Electricity Meter Read-only

Cumulative energy consumption (kWh) and instantaneous power demand (kW)

numeric Unit: kWh / kW json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read total consumption

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read demand

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Brightness Sensor (15) Variable Read-only

numeric Unit: lux json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Variable (15) Variable Read and write

numeric json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

RGB Light (15) HSB Light Read and write

Full HSB color control — hue, saturation, brightness, and correlated color temperature

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write brightness

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write hue

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write saturation

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write color temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Slide (15) Slide Read and write

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Wind Speed Sensor (15) Variable Read-only

numeric Unit: m/s json\_path

Service Attributes

|             |
|-------------|
| Value Types |

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Service Attributes

Value Types

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

```

Reed Contact (15) Reed Contact Read-only

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Temperature Sensor (15) Temperature Sensor Read-only

Temperature (°C) and humidity (%) readings

numeric Unit: °C / % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Thermostat (15) Thermostat Read and write

Current temperature, humidity, and adjustable temperature setpoint

numeric Unit: °C json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read humidity

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write desired temperature

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Multi-Value Switch (15) Multi-value Switch Read and write

Numeric mode selector with values 0-9 for multi-mode device control

numeric json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write switch state

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Blind (15) Blind Read and write

Position level (%) and tilt angle control for blinds and shutters

numeric Unit: % json\_path

Variable: `Id` — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Read blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind level

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Read blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

Write blind slope

```taphome
VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END
```

**Connection:** Packet Parser → HTTP

Possible improvements (10)

- Device Status — DeviceStatus (read-only) available on all devices via discovery but not polled by template
- Operation Mode — OperationMode (manual/automatic) — system property visible in getDeviceValue response
- Manual Timeout — ManualTimeout — system property visible in getDeviceValue response
- Analog Output Desired Value — AnalogOutputDesiredValue — separate from actual AnalogOutputValue (42)
- Hue Brightness Desired Value — HueBrightnessDesiredValue — desired vs actual brightness for lighting
- Multi-Value Switch Desired State — MultiValueSwitchDesiredState — desired vs actual state for MVS
- Blinds Is Moving — BlindsIsMoving — motion detection for blind/slide devices
- Device Discovery — Full device list with supported value types — available via module SA but not per-device
- Location Info — Core location metadata and connectivity status
- Webhook Push Notifications — Real-time state change notifications via HTTP POST — 300ms throttle, alternative to polling

## Import parameters

Enter these values when you import the XML.

| Asked in the app | Default                                |
|------------------|----------------------------------------|
| token            | `xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx` |

## Sources

- TapHome API Official Documentation
  
  [taphome.com](https://taphome.com/en/support/601227274) 2026-03-28
- TapHome HA Integration — ValueType Reference
  
  [github.com](https://github.com/martindybal/taphome-homeassistant/blob/development/taphome_sdk/value_type.py) 2026-03-28
- TapHome HA Integration — API Client Implementation
  
  [github.com](https://github.com/martindybal/taphome-homeassistant/blob/development/taphome_sdk/taphome_api.py) 2026-03-28

## Related Documentation

- [Packet Parser Integration](https://taphome.com/en/compatibility/packet-parser-guide/)
- [Packet Parser (HTTP, TCP, UDP, FTP, MQTT)](https://taphome.com/en/docs/integration/packet-parser/)
- [Packet parser functions](https://taphome.com/en/docs/script/packet-parser/)
- [Parsing functions](https://taphome.com/en/docs/script/parsing-functions/)