---
title: "iEAST AMP80"
description: "Control volume, mute, play/pause, track skip and input source of the iEAST AMP80 streaming amplifier over its LinkPlay HTTP API on port 80, no login."
url: "https://taphome.com/en/compatibility/ieast-amp80/"
language: en
lastmod: 2026-11-18
generator: hugo
ai:
  topics: ["http","audio","linkplay","packet-parser","streaming-amplifier","wifi","ethernet","bluetooth"]
  questions: ["How to integrate the iEAST AMP80 with TapHome?","What does the iEAST AMP80 TapHome template control?","How to connect the iEAST AMP80 to the network for TapHome?","How to check that the iEAST AMP80 HTTP API responds?","Why does the iEAST AMP80 input source show Wi-Fi while streaming from Spotify or AirPlay?","Does the optical input value work on the AMP80 V1 with a coaxial input?","How to restore factory settings on the iEAST AMP80?"]
---

# iEAST AMP80

Communication: Packet Parser → HTTP

> Network address
> 
> TapHome reaches this device at the address entered on import. Give the device a fixed address — an IP reservation in the router, or its mDNS name if it supports one — otherwise the integration stops working when the router changes the address.
> 
> [Network Preparation](https://taphome.com/en/docs/setup/network-preparation/)

## Integration guide

The iEAST AMP80 is a stereo streaming amplifier that drives passive 4 Ω or 8 Ω speakers and plays music over Wi-Fi (2.4 GHz), Ethernet and Bluetooth 5.0, alongside wired analog and digital inputs. It is built on the **LinkPlay** streaming platform, which serves an HTTP API on **port 80**: plain GET requests in the form `http://<IP>/httpapi.asp?command=<command>`, JSON responses, no login and no cloud account.

The TapHome template talks to the amplifier directly over the local network. It polls the player status every 3 seconds and provides seven devices: volume, mute, play / pause, stop, next and previous track, and input source selection.

## Hardware connection

The connector positions below follow the numbering in the AMP80 product manual.

| Connector | Description |
|-----------|-------------|
| Speaker (③) | Passive speakers, 4 Ω or 8 Ω (banana plugs are included) |
| DC (④) | Power input for the supplied adapter |
| IR In (⑤) | External IR receiver — required to use the remote control |
| SUB-out (⑥) | Active subwoofer |
| Coaxial In (⑦) | Digital coaxial input for a CD/DVD player, TV and similar (AMP80 V1) |
| AUX In (⑧) | Analog input, 3.5 mm jack |
| Ethernet (⑨) | RJ-45, 10/100 Mbit/s — network cable to the router |

The two hardware versions differ in their wired inputs: the **AMP80 V1** has a coaxial digital input, while the **AMP80 V2** lists an **optical** digital input and a USB 2.0 input next to AUX in. Check which version is installed before using the digital input from TapHome (see the input source table below).

| Parameter | AMP80 V1 | AMP80 V2 |
|-----------|----------|----------|
| Output power, 4 Ω, 1 kHz | > 80 W per channel @ 1 % THD+N | > 80 W per channel @ 1 % THD+N |
| Output power, 8 Ω, 1 kHz | > 65 W per channel @ 1 % THD+N | > 60 W per channel @ 1 % THD+N |
| Digital input | Coaxial | Optical |
| Supplied power adapter | DC 32 V / 4.75 A (AC 100–240 V, 50/60 Hz) | DC 32 V / 4.75 A (AC 100–240 V, 50/60 Hz) |

The V1 manual marks the DC input itself as 24–32 V / 3.3 A; use the supplied adapter.

### Mode indicator and Connect button

The AMP80 V1 manual describes the front indicator and the multi-function **Connect** button as follows:

| Indicator | Meaning |
|-----------|---------|
| Green, blinking | Powering on |
| Green, slow blink | Standby |
| Green, solid | Wi-Fi mode |
| Blue, solid | Bluetooth |
| White, solid | AUX in |
| Orange, solid | Coaxial in |

- **Short press** — switches to the next mode (input).
- **Long press for 3 s while green** — Wi-Fi network configuration mode.
- **Long press for 3 s while blue** — Bluetooth pairing mode.
- **Long press for 3 s while white** — restores factory settings.

## Network setup

Connect the power adapter first. The green indicator lights up; wait about 30 seconds until the amplifier has fully started.

### Option A — Ethernet

Connect the AMP80 to the router with a network cable. The amplifier is reachable as soon as it has started; no Wi-Fi configuration is needed. For a TapHome installation, Ethernet is the recommended connection.

### Option B — Wi-Fi (2.4 GHz)

1. Install the **iEAST APP** on the phone or tablet (Android, iOS or HarmonyOS).
2. Connect the phone to the **2.4 GHz** Wi-Fi network the amplifier should join.
3. Open the app. A new-device prompt appears; if it does not, put the amplifier into Wi-Fi configuration mode by holding the **Connect** button for 3 seconds while the indicator is green.
4. Select the amplifier, choose the wireless network and enter its password.
5. Follow the prompts in the app until the connection succeeds. The app may offer a firmware update, which takes a few minutes depending on the internet connection.

> [!WARNING]
> The AMP80 supports only the **2.4 GHz** Wi-Fi band (IEEE 802.11 b/g/n) — 5 GHz networks are not supported. The network name (SSID) must not contain Chinese characters; use Latin letters or digits.

### Checking the HTTP API

Open the following address in a web browser on a computer in the same network:

```
http://<IP>/httpapi.asp?command=getPlayerStatus
```

The amplifier answers with a JSON object. The template reads four of its fields:

| Field | Meaning |
|-------|---------|
| `vol` | Current volume, 0–100 |
| `mute` | `0` = not muted, `1` = muted |
| `status` | `play`, `pause`, `stop` or `load` |
| `mode` | Current source, for example `10` network, `40` line-in, `41` Bluetooth, `43` optical |

A reply in the browser means the amplifier is reachable and the API is active — TapHome uses the same requests. `http://<IP>/httpapi.asp?command=getStatusEx` returns further device details, including the firmware version and MAC address.

### Template import in TapHome

Import the template and enter the amplifier's address in the import parameter **IP adresa zariadenia** (IP address of the device); port 80, plain HTTP without authentication and the 3-second polling interval are already set in the template.

### Restoring factory settings

If the amplifier stops responding to the HTTP API, restore its factory settings with one of these methods:

1. **Connect button** — short-press **Connect** to switch to line input (white indicator), then hold the button for 3 seconds until the indicator starts blinking green.
2. **IR remote control** — switch to line input mode with the remote, then hold the same button for 3 seconds.
3. **iEAST APP** — open the device, select **Device information** → **Restore factory settings** and confirm.

## Device capabilities

The device names in the template are in Slovak; they are shown in brackets.

### Volume and mute

- **Volume** (*Hlasitosť*) — a dimmer for continuous volume control from 0 to 100 %. TapHome reads the `vol` field and writes the level with `setPlayerCmd:vol:<0–100>`.
- **Mute** (*Stlmenie*) — a switch with the states *Stlmené* (muted) and *Zapnutý zvuk* (sound on). The state is read from the `mute` field (`0` = sound on, `1` = muted); the commands are `setPlayerCmd:mute:1` and `setPlayerCmd:mute:0`.

### Playback control

| Device | Type | Function | Command |
|--------|------|----------|---------|
| Play / pause (*Prehrávanie*) | Switch | On resumes playback, off pauses it. Reads as on when `status` is `play`; states *Prehráva* (playing) and *Pozastavené* (paused) | `setPlayerCmd:resume` / `setPlayerCmd:pause` |
| Stop (*Stop*) | Push button | Stops playback | `setPlayerCmd:stop` |
| Next track (*Ďalšia skladba*) | Push button | Skips to the next track | `setPlayerCmd:next` |
| Previous track (*Predchádzajúca skladba*) | Push button | Returns to the previous track | `setPlayerCmd:prev` |

According to the LinkPlay API documentation, `stop` also removes the selected source from the player. **Play / pause** resumes a paused stream, but after **Stop** it may not restart playback.

### Input source

**Input source** (*Vstupný zdroj*) is a multi-value switch that switches between the amplifier's inputs:

| Value | Source | `mode` read | Command |
|-------|--------|-------------|---------|
| *Sieť (WiFi)* | Network streaming | `10` | `setPlayerCmd:switchmode:wifi` |
| *Linkový vstup* | AUX in, 3.5 mm jack | `40` | `setPlayerCmd:switchmode:line-in` |
| *Bluetooth* | Bluetooth audio | `41` | `setPlayerCmd:switchmode:bluetooth` |
| *Optický vstup* | Digital input | `43` | `setPlayerCmd:switchmode:optical` |

> [!NOTE]
> The value *Optický vstup* switches the amplifier's digital input with the `optical` command and recognizes it by `mode` `43`, which the LinkPlay documentation assigns to the optical input. That matches the optical input of the AMP80 V2. The LinkPlay API has a separate `co-axial` source, so on an AMP80 V1 with a coaxial input, check on the device that this value selects the coaxial input and is read back correctly.

Any other `mode` value — for example AirPlay, DLNA or Spotify Connect started from a phone, or the idle state — is shown as *Sieť (WiFi)*, which is the template's fallback value.

### Other commands of the HTTP API

The same API offers more functions that the template does not use; they can be added with further devices or called from TapHome scripts:

- **Track metadata** — title, artist and album in the fields `Title`, `Artist` and `Album` of the `getPlayerStatus` response, encoded as hexadecimal UTF-8 strings.
- **Multiroom** — group control of several players with the `multiroom:*` commands.
- **Seeking** — `setPlayerCmd:seek:<position>`, position in seconds; it has no effect on radio streams.
- **Equalizer** — five presets (Normal, Classic, Pop, Jazz, Vocal) with `setPlayerCmd:equalizer:<0–4>`. This command is not described in the published LinkPlay documentation; check it on the device.
- **Presets** — recall a stored preset with `MCUKeyShortClick:<0–10>`.
- **Reboot** — restart the amplifier remotely with `reboot`.

## Troubleshooting

### The amplifier does not respond to HTTP requests

1. Open `http://<IP>/httpapi.asp?command=getPlayerStatus` in a browser. If no JSON comes back, the problem is in the network, not in TapHome.
2. Check that the AMP80 is in the same local network as the TapHome control unit and that no firewall blocks port 80 between them.
3. Check the amplifier's IP address in the router; if it has changed, correct the address in the module settings in TapHome.
4. If the amplifier stopped responding after a firmware update, restart it — send `reboot`, or disconnect the power supply for a moment.
5. As a last resort, restore the factory settings (see above).

The LinkPlay documentation notes that API responses can differ between firmware versions; `getStatusEx` shows which firmware the amplifier runs.

### The playback state does not update

- While a stream is loading, the player reports `status` `load`, which TapHome shows as paused — this is a transitional state.
- The template polls the amplifier every 3 seconds, so a change made in the iEAST APP or another streaming app can take up to one polling interval to appear in TapHome.

### The input source shows the wrong value

Streaming started from Spotify Connect, AirPlay or DLNA reports a `mode` value that does not match any of the four listed sources — the amplifier switched over by itself, and TapHome shows the fallback value *Sieť (WiFi)*.

### Wi-Fi setup fails

- The phone must be connected to a **2.4 GHz** network during setup.
- An SSID with Chinese characters is not supported — rename it using Latin letters or digits.
- If the app cannot find the amplifier, activate Wi-Fi configuration mode by holding **Connect** for 3 seconds while the indicator is green, then repeat the setup.

## Available devices 7

These devices appear in TapHome after import.

iEAST AMP80 Module

Hlasitosť Dimmer

Read level

```taphome
VAR r := SENDHTTPREQUEST("/httpapi.asp?command=getPlayerStatus");
IF r.IsSuccess
    RETURN(PARSEJSON(r.Content, "$.vol", true) / 100);
END
RETURN(0);
```

Write level

```taphome
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:vol:" + ROUND(Le * 100));
```

Stlmenie Switch

Values / States: Stlmené · Zapnutý zvuk

Read switch state

```taphome
VAR r := SENDHTTPREQUEST("/httpapi.asp?command=getPlayerStatus");
IF r.IsSuccess
    RETURN(PARSEJSON(r.Content, "$.mute", true));
END
RETURN(0);
```

Write switch state

```taphome
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:mute:" + IF(St, 1, 0));
```

Prehrávanie Switch

Values / States: Prehráva · Pozastavené

Read switch state

```taphome
VAR r := SENDHTTPREQUEST("/httpapi.asp?command=getPlayerStatus");
IF r.IsSuccess
    VAR status := PARSEJSON(r.Content, "$.status", true);
    RETURN(IF(status = "play", 1, 0));
END
RETURN(0);
```

Write switch state

```taphome
IF St
    SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:resume");
ELSE
    SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:pause");
END
```

Stop Push Button

Read button state

```taphome
RETURN(0);
```

Write button state

```taphome
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:stop");
```

Ďalšia skladba Push Button

Read button state

```taphome
RETURN(0);
```

Write button state

```taphome
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:next");
```

Predchádzajúca skladba Push Button

Read button state

```taphome
RETURN(0);
```

Write button state

```taphome
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:prev");
```

Vstupný zdroj Multi-value Switch

Values / States: Sieť (WiFi) · Linkový vstup · Bluetooth · Optický vstup

Read switch state

```taphome
VAR r := SENDHTTPREQUEST("/httpapi.asp?command=getPlayerStatus");
IF r.IsSuccess
    VAR m := PARSEJSON(r.Content, "$.mode", true);
    RETURN(SWITCH(m, 10, 0, 40, 1, 41, 2, 43, 3, 0));
END
RETURN(0);
```

Write switch state

```taphome
VAR src := SWITCH(Mu, 0, "wifi", 1, "line-in", 2, "bluetooth", 3, "optical", "wifi");
SENDHTTPREQUEST("/httpapi.asp?command=setPlayerCmd:switchmode:" + src);
```

**Connection:** Packet Parser → HTTP

## Import parameters

Enter these values when you import the XML.

| Asked in the app     | Default         |
|----------------------|-----------------|
| IP adresa zariadenia | `192.168.1.100` |

## Related Documentation

- [Packet Parser Integration](https://taphome.com/en/compatibility/packet-parser-guide/)
- [Packet Parser (HTTP, TCP, UDP, FTP, MQTT)](https://taphome.com/en/docs/integration/packet-parser/)
- [Packet parser functions](https://taphome.com/en/docs/script/packet-parser/)
- [Parsing functions](https://taphome.com/en/docs/script/parsing-functions/)

