TapHome allows seamless integration of devices from various manufacturers, enabling you to conveniently control all devices in your home. With pre-prepared templates, you can easily add devices and expand home control as needed.
List of ready-made templates
Use the filter in the left panel to search for a suitable template for installing your device.
No templates match your search.
GTD IOT 8-Button Touch Switch
GTD IOT 8-button capacitive touch switch panel (model 15D-BK-MODBUS) with Modbus RTU over RS-485. 8 independent button controls with LED backlight mirroring via TapHome.
GTD Therm
GTD Therm wall-mount HVAC thermostat panel connected to TapHome via Modbus TCP. Temperature control, fan speed selection, LCD display parameter, panel backlight and impulse touch buttons for quick actions.
GTD8
GTD8 8-channel switch and LED panel connected to TapHome via Modbus TCP. 8 independent on/off switches with corresponding LED indicator controls, all using holding registers.
Shelly Door/Window 2
Shelly Door/Window 2 battery-powered contact sensor connected to TapHome via MQTT. Detects door/window open and close state, reports temperature, luminance and battery level.
Shelly DUO
Shelly DUO Wi-Fi white LED bulb (E27, CCT 2700-6500 K). Control brightness and color temperature via HTTP or MQTT from TapHome.
Shelly DUO RGBW
Shelly DUO RGBW GU10 smart bulb with full RGB color and tunable white. Control color, brightness, and CCT via HTTP or MQTT from TapHome.
Shelly Gas
Shelly Gas Wi-Fi gas detector (CNG or LPG) integrated with TapHome via HTTP. Monitors gas alarm state and concentration in ppm, with mute and self-test controls.
Shelly H&T Gen3
Shelly H&T Gen3 battery-powered temperature and humidity sensor connected to TapHome via MQTT. Reports ambient temperature, relative humidity, and battery level.
Shelly Motion 2
Shelly Motion 2 battery-powered PIR motion and lux sensor connected to TapHome via MQTT. Detects motion events, reports luminance, temperature and battery level.
Shelly Plus H&T
Shelly Plus H&T battery-powered temperature and humidity sensor connected to TapHome via MQTT. Reports ambient temperature, relative humidity, battery level, and device diagnostics.
Shelly Plus RGBW PM
Shelly Plus RGBW PM Gen2+ Wi-Fi RGBW LED controller with power metering. Three switchable profiles — light (4-channel dimmer), rgb, and rgbw — with per-channel energy monitoring via HTTP from TapHome.
Shelly Plus Smoke
Shelly Plus Smoke battery-powered photoelectric smoke alarm connected to TapHome via MQTT. Reports smoke alarm state, battery level and voltage with connectivity monitoring.
Shelly RGBW2
Shelly RGBW2 Wi-Fi RGBW LED controller with two operating modes. Control RGB color strips or four independent white channels via HTTP from TapHome.
Alfen Eve Single Socket
Alfen Eve Single S-line and Pro-line wallbox (socket variant) connected to TapHome via Modbus TCP. EV charging monitoring with Mode 3 state tracking, per-phase power and voltage metering, energy consumption, and dynamic current limiting.
Aqara Door and Window Sensor
Aqara MCCGQ11LM Zigbee door and window contact sensor connected to TapHome via MQTT through a Zigbee2Tasmota gateway. Detects open/close state and monitors battery level.
Aqara Single Switch Module T1 (With Neutral)
Aqara SSM-U01 compact Zigbee relay module integrated with TapHome via MQTT through a Zigbee2Tasmota gateway. On/off switching for lights and appliances up to 2500W.
Aqara Temperature, Humidity and Pressure Sensor
Aqara WSDCGQ11LM Zigbee sensor integrated with TapHome via MQTT through a Zigbee2Tasmota gateway. Measures temperature, humidity and atmospheric pressure.
Aqara Vibration Sensor
Aqara DJT11LM Zigbee vibration sensor integrated with TapHome via MQTT through a Zigbee2Tasmota gateway. Detects vibration, tilt and drop events.
Aqara Water Leak Sensor
Aqara SJCGQ11LM Zigbee water leak sensor connected to TapHome via MQTT through a Zigbee2Tasmota gateway. Detects water presence and monitors battery level.
ComWinTop CWT-THxxx
ComWinTop CWT-THxxS series RS485 Modbus RTU temperature and humidity sensor. Monitor ambient temperature and relative humidity via TapHome with configurable slave ID and baud rate.
Daikin FWEC3
Daikin FWEC3 Advanced Plus LCD controller for fan coil units with Modbus RTU communication. Mode, thermostat, fan speed, and water temperature monitoring via TapHome.
Domat R312/R313
Domat R312/R313 (formerly M312/M313) 8-channel triac PWM output module. Modbus RTU over RS-485 integration for floor heating valve and thermal actuator control via TapHome.
Domat UC100 Thermostat
Domat UC100 Modbus RTU room controller with temperature measurement, setpoint control, fan speed and heating/cooling mode switching, digital valve output and optional CO2 sensor. Integration via RS-485 through TapHome.
IKEA TRADFRI E1810
IKEA TRADFRI E1810 5-button Zigbee remote control integrated with TapHome via Zigbee2Tasmota gateway. Detects button presses for scene triggering and automation.
Livarno SMART TS0505B
Livarno SMART TS0505B Zigbee RGB+CCT light controlled via TapHome through a Zigbee2Tasmota gateway. Supports full RGB color, color temperature, and brightness.
Moes Smart Switch
Moes Zigbee smart wall switch integrated with TapHome via a Zigbee2Tasmota gateway. Glass touch panel with on/off relay control.
Pichler PKOM4
Pichler PKOM4A/AK heat pump combi units connected to TapHome via Modbus TCP. Operating mode control, ventilation levels, room and DHW temperature setpoints, energy monitoring and filter maintenance.
Shelly 2.5
Shelly 2.5 dual-channel Wi-Fi relay with per-channel power metering. Control two independent circuits and monitor energy consumption via HTTP from TapHome.
Shelly 2PM Gen3
Shelly 2PM Gen3 dual-channel Wi-Fi relay with power metering and cover/blind control. Switch two circuits or control a motorized blind via HTTP RPC API from TapHome.
Shelly 3EM
Shelly 3EM 3-phase energy meter with contactor relay. Monitor per-phase power, voltage, current, energy and power factor via HTTP or MQTT from TapHome.
Shelly Dimmer 2
Shelly Dimmer 2 Wi-Fi dimmer with power metering. Control brightness, on/off state and monitor energy consumption via HTTP from TapHome.
Shelly EM
Shelly EM single-phase energy meter with 2 CT channels and contactor relay. Monitor per-channel power and energy via HTTP or MQTT from TapHome.
Shelly Plus 1
Shelly Plus 1 Wi-Fi relay switch with potential-free contacts. Control a single circuit over HTTP from TapHome — no cloud required.
Shelly Plus 1PM
Shelly Plus 1PM Gen2+ Wi-Fi relay with power metering. Control a single circuit and monitor real-time power, voltage, current, and energy via HTTP or MQTT from TapHome.
Shelly Plus 2PM
Shelly Plus 2PM dual-channel Wi-Fi relay with power metering and motorized cover control. Switch two circuits or control a roller shutter via HTTP RPC API from TapHome.
Shelly Plus i4
Shelly Plus i4 Wi-Fi 4-channel digital input module. Detect push-button presses and switch states via MQTT from TapHome — no relays, pure input device.
Shelly PM Mini Gen3
Shelly PM Mini Gen3 compact Wi-Fi power monitor. Track real-time power consumption, voltage, current and frequency via HTTP RPC API from TapHome — no relay, monitor only.
Shelly Pro 3
Shelly Pro 3 DIN rail 3-channel relay. Control three independent circuits via HTTP RPC API from TapHome — no power monitoring, pure switching.
Shelly Pro 4PM
Shelly Pro 4PM DIN rail 4-channel relay with per-channel power metering. Control four independent circuits and monitor real-time energy consumption via HTTP from TapHome.
SolaX SK-SU Hybrid Inverter
SolaX SK-SU series hybrid inverters (Gen2 X1 Hybrid) connected to TapHome via Modbus TCP. Solar production monitoring, battery state of charge, grid power metering, and temperature sensors.
Stiebel Eltron HPA-0 Serie Heat Pump
Stiebel Eltron HPA-0 Serie air source heat pump controlled via Modbus TCP through the ISG web/ISG plus gateway. TapHome provides operating mode selection, heating circuit and DHW temperature setpoints with comfort and ECO levels.
Wake on LAN
Wake on LAN magic packet sender via UDP. Wake sleeping PCs, NAS devices, and servers from TapHome automations using the standard WoL protocol.
Zigbee2Tasmota Gateway
Zigbee2Tasmota gateway bridge for connecting Zigbee devices to TapHome via MQTT. Manages device pairing and discovery through a Tasmota-flashed coordinator.
Alfen Eve Wallbox
Alfen Eve Single and Double wallboxes (NG9xx platform) integrated with TapHome via Modbus TCP. Board temperature monitoring and charger identification attributes.
Brink Flair
Brink Flair 325/400 heat recovery ventilation unit with Modbus RTU control via RS-485. Airflow control, bypass management, fan monitoring, temperature and humidity readings, filter status and CO2 sensor data via TapHome.
CNB CZK Exchange Rates
Official Czech National Bank CZK exchange rates for 30 currencies. Track real-time forex rates in TapHome via public CNB API — no authentication required.
Delta AC MAX Smart
Delta AC MAX Smart EV charger with Modbus TCP over Ethernet. TapHome monitors charger and EVSE status, charging power, voltage, current, energy and controls charging power limit.
Domat ECIO2
Domat ECIO2 multi I/O compact module connected to TapHome via Modbus TCP. 8 digital outputs, 6 analogue outputs, 8 analogue inputs and 8 digital inputs for HVAC and building automation.
Ecowitt WS2910 (Cloud API)
Ecowitt Cloud API integration for the WS2910 Wi-Fi weather station. Monitor outdoor and indoor temperature, humidity, wind, rainfall, barometric pressure, solar irradiance and UV index via HTTPS — no local connection required.
Forecast.Solar
Forecast.Solar integration for TapHome. Get solar PV energy production forecasts via HTTP — plan battery charging, heat pump scheduling, and EV charging based on expected solar output.
Huawei SUN2000 (Modbus RTU)
Huawei SUN2000 3-10KTL solar inverter connected to TapHome via Modbus RTU over RS-485. Active power monitoring with power control, DC input power, PV string currents, grid power meter, battery SOC, daily and total energy counters, and inverter status.
Inepro PRO380-S-CT
Inepro PRO380-S-CT 3-phase CT energy meter with Modbus RTU (RS-485). TapHome template provides 15 devices for total, per-phase, import/export active and reactive energy metering with power factor and apparent power monitoring.
KEBA KeContact P30 Charging Station
KEBA KeContact P30 c-series and x-series EV wallbox connected to TapHome via Modbus TCP. Charging state monitoring, energy metering, current control and failsafe management.
Kostal PLENTICORE plus
Kostal PLENTICORE plus hybrid PV inverter connected to TapHome via Modbus TCP. PV production monitoring, battery management, home consumption breakdown by source, and grid powermeter readings.
Meteosource Weather API
Meteosource Weather API integration for TapHome — current weather conditions, daily forecast temperatures and precipitation via HTTPS cloud API with free tier support.
Nanogreen Spot Prices
Nanogreen spot electricity prices for the Czech market. 24 hourly prices in CZK/kWh, cheapest-hour indicators, binary sensors for automation, and live OTE market price — all via HTTP from TapHome.
OKTE Spot Prices
OKTE day-ahead electricity spot prices for Slovakia. Monitor hourly EUR/MWh prices, rankings, min/max/average and time window analysis via TapHome HTTP Packet Parser.
OpenHolidays API
OpenHolidays API integration for TapHome. Query public and school holidays for 35+ countries via HTTP — automate heating, lighting, and alarm schedules based on holidays and weekends.
OpenWeather
OpenWeather API integration for TapHome — current weather, 3-hour and 24-hour forecasts including temperature, humidity, pressure, visibility, wind speed and weather conditions via HTTPS cloud API.
Orno OR-WE-525/526
Orno OR-WE-525/526 single-phase energy meter with Modbus RTU (RS-485). TapHome template provides total, import, and export energy metering with bidirectional power measurement, current sensing, and configurable combined code mode.
OTE-CR Spot Prices
Czech electricity spot prices from OTE-CR Day-Ahead Market. Track hourly prices in EUR or CZK, find cheapest periods, and automate energy consumption with TapHome.
SBC ALE3D5F
SBC ALE3D5F 3-phase energy meter with Modbus RTU (RS-485) via TCP gateway. TapHome template provides 14 sensors for per-phase and total voltage, current, active power, and reactive power monitoring.
Schrack i-CHARGE CION
Schrack Technik i-CHARGE CION wallbox (11 kW and 22 kW) integrated via Modbus RTU over RS-485. TapHome controls charging authorisation, current setpoint, connector lock, CP status monitoring and temperature.
Shelly Pro 3EM
Shelly Pro 3EM professional three-phase energy meter with external CTs and LAN/Wi-Fi. Monitor per-phase power, current, voltage, and bidirectional energy via HTTP from TapHome.
SmartThings Switch/Plug with Power Metering
SmartThings Switch/Plug with power metering via SmartThings Cloud API. Control on/off and monitor energy consumption from TapHome over HTTPS.
Sofar Solar HYD KTL-3PH
Sofar Solar HYD 5-20KTL-3PH three-phase hybrid inverter with battery storage, monitored via Modbus RTU over RS-485. PV generation, battery state, grid power, energy counters and per-phase voltage monitoring through TapHome.
SolaX Hybrid X1/X3 Gen 4
SolaX X1-HYBRID and X3-HYBRID Gen 4 energy storage inverter integration via Modbus RTU over RS-485. Battery monitoring, PV power tracking, grid feed-in metering, charger mode readback and night charge SOC monitoring through TapHome.
SolaX Inverter (Cloud API)
SolaX Cloud API integration for all SolaX inverter types (X1, X3, A1, J1 series). Monitor PV production, battery state, grid power flow and energy totals via HTTPS — no physical wiring required.
TapHome API
TapHome API PacketParser template — bridge any TapHome Core device to another TapHome Core via REST API. 15 device types with 15 instances each (225 devices total) over HTTPS.
Victron Energy GX Line Inverter
Victron Energy GX devices (Cerbo GX, Venus GX, CCGX) connected to TapHome via Modbus TCP. Battery SOC monitoring, 3-phase AC input/output metering, ESS power setpoints, inverter mode control and alarm monitoring.
Wattsonic Hybrid Inverter G3
Wattsonic Gen3 Li-HV three-phase hybrid inverter (6–20 kW) integrated via Modbus RTU. TapHome monitors PV generation, battery state, grid power flow, and per-phase metering, and controls EPS/UPS, grid export limits, AC power settings, and peak load shifting.
Weathercloud
Weathercloud cloud weather data integration. Poll real-time weather station data — temperature, humidity, wind, rain, UV index and more — via HTTP from TapHome.
Xiaomi 1T (Valetudo)
Xiaomi Mijia 1T robot vacuum controlled via Valetudo open-source firmware. Monitor battery level, track cleaning status, and control the vacuum over HTTP from TapHome.
ComWinTop CWT-ULS Ultrasonic Level Sensor
ComWinTop CWT-ULS ultrasonic level sensor with Modbus RTU over RS-485. Non-contact liquid level measurement, distance to surface, temperature compensation, and two configurable relay outputs via TapHome.
Delta AC MAX Basic
Delta AC MAX Basic EV charger with Modbus RTU over RS-485. TapHome monitors charging state, power, voltage, current, energy and controls charging power limit and suspend via a single template.
Eastron SDM120
Eastron SDM120 single-phase DIN-rail energy meter with Modbus RTU (RS-485). TapHome template provides 4 devices for total, import, export energy metering and current monitoring with configurable measurement modes.
EPever IP-Plus Inverter
EPever IPower-Plus pure sine wave off-grid inverter with Modbus RTU (RS-485) integration. Monitor AC load power, control inverter on/off, and adjust voltage protection thresholds via TapHome.
Fonestar WA-225W
Fonestar WA-225W DLNA/UPnP Wi-Fi stereo amplifier. Control volume, mute, and playback transport via HTTP (SOAP) from TapHome using the Packet Parser.
go-e Gemini flex Wallbox
go-e Gemini flex EV wallbox integration with TapHome via HTTP API v2. Control charging current, mode, and phase switching, and feed external PV/grid data for surplus charging.
Kostal PLENTICORE plus
Kostal PIKO IQ / PLENTICORE plus hybrid solar inverter connected to TapHome via Modbus TCP. PV production monitoring, battery state-of-charge with min/max control, yield statistics and inverter diagnostics.
Orno OR-WE-515
Orno OR-WE-515 single-phase multitariff energy meter with Modbus RTU (RS-485). TapHome template provides total energy metering, 4-tariff energy counters, real-time electrical measurements, and configurable time-of-use scheduling.
Orno OR-WE-517
Orno OR-WE-517 3-phase multitariff energy meter with Modbus RTU (RS-485). TapHome template provides per-phase and total energy metering, 4-tariff scheduling, bidirectional counters, and configurable service actions.
Satel ETHM-1 Plus
Satel ETHM-1 Plus Ethernet module for INTEGRA, PERFECTA and VERSA alarm panels. TapHome monitors up to 128 alarm zones via the open TCP integration protocol.
Shelly 1PM Gen3
Shelly 1PM Gen3 Wi-Fi relay with power metering. Control a single circuit and monitor real-time power consumption via HTTP RPC API from TapHome.
Shelly 3EM Gen3
Shelly 3EM Gen3 three-phase energy meter with Wi-Fi. Monitor real-time power, voltage, current, and cumulative energy on all three phases via HTTP from TapHome.
Sonos
Sonos wireless speaker integration for TapHome. Control volume, playback, playlists, and radio stations via UPnP/SOAP over the local network.
Wattsonic WTS 3-Phase Hybrid Inverter
Wattsonic WTS 3-Phase hybrid inverter (6–20 kW) integrated via Modbus RTU. TapHome controls running modes, battery schedules, SOC protection, and grid export.
Fronius Smart Meter
Fronius Smart Meter TS 65A-3 bidirectional energy meter with Modbus TCP via Fronius Datamanager. TapHome template provides 2 electricity meters for import and export energy monitoring with SunSpec float registers.
GoodWe ET Plus+ Inverters
GoodWe ET Plus+ hybrid solar inverters connected to TapHome via Modbus TCP. PV production monitoring, battery management, 3-phase grid and backup load metering, energy counters and inverter diagnostics.
Carlo Gavazzi EM24
Carlo Gavazzi EM24 3-phase DIN-rail energy meter with Modbus RTU (RS-485). TapHome template provides 7 devices for per-phase energy metering, tariff counters, and bidirectional import/export totals.
Daikin RTD-NET FBA-A(9)
Daikin RTD-NET Modbus RTU interface adapter for centralized control of VRV, Sky Air, VAM and VKM indoor units via RS-485. ON/OFF, operation mode, fan speed, louvre direction and temperature monitoring through TapHome.
SolarEdge SunSpec Inverter
SolarEdge SunSpec Modbus RTU integration for TapHome. Monitor AC/DC power, voltage, current, frequency, energy production, heat sink temperature and operating state from any SunSpec-compatible SolarEdge inverter via RS-485.
Daikin DTA116A51 VRV Gateway
Daikin DTA116A51 DIII-NET/Modbus Communication Adaptor for VRV systems. Controls up to 16 indoor units via RS-485 Modbus RTU — temperature, fan speed, operation mode and vane direction through TapHome.
2VV Daphne
2VV Daphne heat recovery unit (HRU) integration via Modbus RTU over RS-485. Airflow control, temperature monitoring, filter status, and temperature sensor selection through AirGENIO controls and TapHome.
Alnor HRU-PremAIR
Alnor HRU-PremAIR heat recovery ventilation unit with Modbus RTU control via BRDG-02R13 communication module. Ventilation speed, temperature monitoring, bypass control, pre-heater setpoint and humidity via TapHome.
EBM-Papst EC Fan (Modbus RTU)
EBM-Papst series 84/112/150/200 EC fan with integrated Modbus RTU interface. Speed control, power monitoring, RPM readback, module temperature and error reporting via TapHome.
Siber DF EVO
Siber DF EVO double-flow heat recovery ventilation unit with Modbus RTU control via DFEVORFRS485 RF-RS485 gateway. Ventilation speed, temperature monitoring, airflow measurement, bypass and filter status via TapHome.
Xvent Xcont Central
Xvent Xcont Central Modbus RTU controller for Xhouse and Xflat heat recovery units. Fan speed control, temperature and humidity monitoring, air quality thresholds, boost and summer modes via TapHome.
Zehnder ComfoConnect PRO
Zehnder ComfoConnect PRO Modbus TCP gateway connected to TapHome for controlling Zehnder ComfoAir ventilation systems. Ventilation preset control, temperature and humidity monitoring, filter status, temperature profile selection and boost mode.
Atrea aMotion
Atrea DUPLEX ventilation units with aMotion controller connected to TapHome via Modbus TCP. Operating mode selection, thermostat control, fan power adjustment, temperature sensors, bypass and zone control, and 50+ diagnostic registers.
Brink Renovent Excellent
Brink Renovent Excellent 300/400/450 residential heat recovery ventilation unit with Modbus RTU control via RS-485. Temperature monitoring, ventilation speed presets, bypass control, filter status and preheater diagnostics via TapHome.
Daikin Altherma 3 DCOM-RW Heat Pump
Daikin Altherma 3 heat pump integration via DCOM-LT/MB Modbus RTU gateway. Advanced TapHome template with module-level error handling, service attributes for system status monitoring, and service actions for setpoint management with parameter validation.
De Dietrich HPI S 11 TR
De Dietrich HPI S 11 TR heat pump connected to TapHome via Modbus RTU through BDR Thermea GTW-08 gateway. Zone thermostat control, flow/return temperature monitoring, outdoor temperature, water pressure and system power readout for up to 7 heating zones.
Eastron SDM630
Eastron SDM630 3-phase energy meter with Modbus RTU (RS-485). TapHome template provides 12 electricity meters for total, per-phase, import and export energy monitoring with detailed service attributes.
Ecoforest HP24
Ecoforest ecoGEO/ecoAIR heat pump integration via Modbus RTU over RS-485 BMS2 port. Temperature monitoring, production mode statuses, compressor diagnostics, power metering, setpoints and operation program via TapHome.
Fujitsu Air Condition via UTY-VMSX
Fujitsu UTY-VMSX Modbus RTU converter for controlling Fujitsu indoor AC units via RS-485. Temperature control, operation modes, fan speed, vertical and horizontal airflow direction, energy save and anti-freeze functions via TapHome.
Geminox THRi
Geminox THRi gas condensing boiler connected via Amit DM-OT2 OpenTherm-to-Modbus RTU gateway. Heating and DHW temperature control, burner status, flue gas temperature, water pressure and heat source power monitoring via TapHome.
Gree U-Match Air Conditioning
Gree U-Match R32 air conditioning units connected to TapHome via Modbus RTU over RS-485. Power control, operating mode selection, thermostat setpoint, fan speed, swing control and temperature monitoring through the Gree Modbus Gateway.
Helios easyControls 3.0
Helios easyControls 3.0 Modbus RTU integration for KWL ventilation units with heat recovery. CO2 and humidity monitoring, fan speed profiles, ventilation mode control, fireplace mode, and timer management via TapHome.
Jablotron Futura
Jablotron Futura L/M/S and L+ heat recovery ventilation units connected to TapHome via Modbus TCP. Ventilation mode control, temperature and humidity monitoring, timed boost/circulation/overpressure functions, zone sensors, ALFA room controllers and external buttons.
Komfovent Air Recovery
Komfovent DOMEKT residential air recovery unit with C6/C6M controller. Ventilation mode control, temperature monitoring, ECO mode, scheduling, power consumption and filter management via Modbus RTU over RS-485.
Nilan CTS-602 Air Recovery
Nilan CTS-602 air recovery and ventilation controller with Modbus TCP integration for TapHome. Temperature setpoint control, ventilation step control, humidity monitoring, operating mode selection and electric boiler switching for Comfort 250-600 series HRV units.
Olimpia Splendid Fan Coil (Bi2)
Olimpia Splendid Bi2 fan coil units connected to TapHome via Modbus TCP gateway. Fan speed, heating/cooling mode, setpoint temperature, valve status monitoring and absence control.
Samsung MIM-B19N (EHS)
Samsung MIM-B19N Modbus RTU gateway for HE, HT and EHS heat pump units with R1/R2 Samsung bus connection. Water temperature monitoring, hot water control, operation modes, quiet mode and away function via TapHome.
Samsung MIM-B19N (Gateway)
Samsung MIM-B19N Modbus RTU gateway diagnostic module for TapHome. Monitors error registers, outdoor unit errors, and discovers all 48 indoor unit slots with automatic type detection (HE, HT, EHS, FCU, ERV, AHU, Chiller).
Samsung MIM-B19N (IU)
Samsung MIM-B19N Modbus RTU gateway for air conditioning indoor units (cassette, wall, 360) with R1/R2 Samsung bus connection. Room temperature control, fan speed, operation modes, 360 airflow direction, vertical vane and Wind-Free function via TapHome.
Sinclair Ontario Heat Pump
Sinclair S-Therm Ontario monoblock air-to-water heat pump with Modbus RTU control via RS-485. Temperature monitoring, operation mode, hot water tank, weather-dependent heating, floor commissioning, disinfection and error diagnostics via TapHome.
Sinclair Uni Split Air Conditioning
Sinclair Uni Split DC Inverter air conditioning with integrated Modbus RTU interface. Temperature control, operation modes, fan speed, swing positions and sleep modes via TapHome over RS-485.
Stiebel Eltron HPA-O Heat Pump
Stiebel Eltron HPA-O air source heat pump controlled via Modbus TCP through the ISG web/ISG plus gateway. TapHome provides operating mode selection, heating circuit and DHW temperature setpoints, runtime counters and sensor monitoring.
Systemair SAVE VTR 700
Systemair SAVE VTR 700 heat recovery ventilation unit with Modbus RTU control via TapHome. User mode selection, fan speed, temperature monitoring, CO2/humidity demand control, ECO mode, free cooling and comprehensive alarm management.
Vallox Ventilation
Vallox MV series heat recovery ventilation units connected to TapHome via Modbus RTU (with RTU-to-TCP gateway). Fan speed control, Home/Away/Boost mode management, five temperature sensors, humidity and CO2 monitoring.
Viessmann Vitogate 300 + Vitocal 200
Viessmann Vitogate 300 Modbus RTU/TCP gateway for Vitocal 200 heat pump with heating circuit, cooling circuit, DHW, solar and compressor monitoring via TapHome. 27 devices including thermostats, operating modes, supply temperatures, pump status and party/economy modes.
Viessmann Vitogate 300 + Vitotronic 200 HK3B
Viessmann Vitogate 300 Modbus RTU/TCP gateway for Vitotronic 200 HK3B boiler controller with 3 heating circuits, DHW and solar monitoring via TapHome. 33 devices including thermostats, operating modes, supply temperatures, pump status and party/economy modes.
Wolf WRS-K
Wolf WRS-K air handling unit with Modbus RTU interface for ventilation control via TapHome. Temperature monitoring, fan speed, room thermostat, CO2 air quality and fresh air proportion control over RS-485.
Daikin Altherma 3 Heat Pump
Daikin Altherma 3 heat pump integration via DCOM-LT/MB Modbus RTU gateway. TapHome template with 20 devices for temperature monitoring, space heating/cooling control, DHW management, weather-dependent setpoints and compressor diagnostics.
LG ThermaV (2021+)
LG ThermaV air-to-water heat pump Modbus RTU integration with TapHome. Heating/cooling mode control, DHW on/off, temperature monitoring (water inlet/outlet, room, DHW tank, solar collector) and target temperature setpoints.
Midea M-Thermal Heat Pump
Midea M-Thermal A Series Split R32 heat pump with Modbus RTU over RS-485. Temperature monitoring, heating/DHW control, compressor diagnostics and operating mode selection via TapHome.
Mitsubishi Ecodan EHST20C
Mitsubishi Ecodan EHST20C air-to-water heat pump integration via Modbus TCP through the Procon MelcoBEMS MINI (A1M) gateway. Temperature monitoring, system ON/OFF, heating status, energy metering and flow rate via TapHome.
Nibe F1245
Nibe F1245 ground source heat pump integrated via Modbus RTU through the MODBUS 40 RS-485 accessory. TapHome provides temperature monitoring, operating mode control, hot water management with Economy/Normal/Luxury modes, compressor status, and environmental sensors.
Nibe SMO S40 Heat Pump Controller
Nibe SMO S40 heat pump controller connected to TapHome via Modbus TCP. Temperature monitoring, heating curve adjustment, hot water demand control, degree minutes, operating mode and alarm management for NIBE air/water heat pump systems.
Nibe VVM S320
Nibe VVM S320 indoor heat pump module connected to TapHome via built-in Modbus TCP. Temperature monitoring, heating curve control, hot water demand management, ERS 1 ventilation fan speeds, degree minutes, energy metering, and operating mode selection.
Atrea RD5 Air Recovery
Atrea DUPLEX heat recovery ventilation units with RD5 controller connected to TapHome via Modbus TCP. Thermostat control, operating modes, fan power adjustment, four temperature sensors and 45+ diagnostic alarms.
eBUS Adapter Shield C6 Stick
eBUS Adapter Shield C6 Stick by john30 connected to TapHome via MQTT. Monitors adapter health — eBUS signal, ebusd daemon status, onboard temperature, and uptime.
Carlo Gavazzi EM340F
Carlo Gavazzi EM340F 3-phase bidirectional energy meter with Modbus RTU integration for TapHome. Tracks per-phase production and consumption energy counters with import/export separation, ideal for solar and prosumer installations.
Fronius Symo Solar Inverter
Fronius Symo 3-phase solar inverter connected to TapHome via Modbus TCP (SunSpec). Real-time AC production monitoring, lifetime energy tracking, inverter operating state, and per-string DC power.
Huawei SUN2000
Huawei SUN2000 3-10KTL solar inverter connected to TapHome via Modbus TCP. Active power monitoring, PV string currents, daily and total energy counters, inverter status, battery storage overview, and power control actions.
Shelly Plug S
Shelly Plug S Wi-Fi smart plug with energy metering. Monitor power consumption and control appliances remotely via HTTP from TapHome.
Dantherm HCV Air Recovery
Dantherm HCV 300-700 heat recovery ventilation units connected to TapHome via Modbus TCP. Fan speed control, operating modes, temperature monitoring and quick-access Away and Fireplace switches.
Nilan CTS-602
Nilan CTS-602 heat pump and ventilation controller with Modbus TCP integration for TapHome. Temperature monitoring, climate control, hot water management, ventilation step control and output status monitoring.
Shelly 1PM
Shelly 1PM Wi-Fi relay with power metering. Control a single circuit and monitor real-time power consumption via HTTP from TapHome.
Shelly Flood
Shelly Flood battery-powered water leak sensor connected to TapHome via MQTT. Detects water presence, reports ambient temperature and battery level.
Daikin EKMBPP1
Daikin EKMBPP1/EKMBPP1A Modbus RTU adapter for VRV, Sky Air and VAM/VKM units with P1P2 bus connection. Temperature monitoring, fan speed, operation modes, airflow direction and Smart Grid control via TapHome.