24 UI Module

A very flexible input module. Every single input terminal can be configured to any possible type of input. Thanks to that all inputs are being fully utilized, none stay unused.


  • 24 universal inputs configurable for:
    • NTC temperature inputs with resistance measurement range 100Ohm – 100kOhm +-50Ohm. Measurement deviation on 1km Cat6 cable: -0.3 °C at 25 °C.
    • Push button inputs
    • Reed / status inputs
    • Impulse counter inputs, frequency 200Hz per channel, sample rate 400Hz per channel, pulse on time > 2.5 milliseconds
    • Analog inputs 0-10V with voltage measurement range 0-26VDC, single-ended type, resolution 12bits, accuracy 0.1% of full scale, input impedance >16kOhm, normal mode rejection 50dB at 60Hz, conversion time 1250 milliseconds
    • For analog input 4-20mA it is necessary to connect a 500Ohm resistor and set in Service settings of the input minimum voltage to 2V (screenshot in the gallery)
  • Log0: 0-7V, log1: 8-24V
  • Power supply 24VDC +-10%
  • Energy consumption 1W
  • Protection IP20, operating temperature: 0 to + 55 ° C
  • DIN rail, 6 modules. Width 107 mm, height 59 mm.

DWG download


Wiring schemes

Wiring schemes