TapHome API

Packet Parser → HTTP

Přidal

Poslední aktualizace: 03. 2026

Dokumentace TapHome API

Šablona TapHome API je PacketParser HTTP šablona, která integruje vlastní REST API TapHome Core zpět do TapHome. To umožňuje komunikaci Core-to-Core — zařízení vystavená na jednom TapHome Core lze zrcadlit jako nativní zařízení na jiném Core. Šablona komunikuje přes HTTPS (cloud přes api.taphome.com:443) nebo HTTP (lokální síť přes http://{core-ip}/api/...) s autentizací bearer tokenem.

Šablona poskytuje 15 unikátních typů zařízení s 15 instancemi (225 zařízení celkem), pokrývajících spínače, stmívače, senzory, měřiče, žaluzie, osvětlení, termostaty a další. Každé zařízení čte a zapisuje hodnoty pomocí endpointů getDeviceValue a setDeviceValue se specifickými parametry valueTypeId.

Konfigurace

Šablona TapHome API vyžaduje dva konfigurační parametry:

API token — vygenerovaný na zdrojovém Core v Nastavení > Vystavit zařízení > TapHome API. Token používá vlastní bearer formát (Authorization: TapHome {token}). V jednom okamžiku je aktivní pouze jeden token — vygenerování nového zneplatní předchozí.
ID zařízení — každá instance šablony se mapuje na konkrétní ID zařízení na zdrojovém Core. Použijte discovery endpoint (/api/TapHomeApi/v1/discovery) k zobrazení všech vystavených zařízení s jejich ID a podporovanými typy hodnot.

Šablona podporuje dva režimy přístupu s identickou strukturou API:

Cloud — https://api.taphome.com/api/TapHomeApi/v1/ (přístup přes internet, funguje odkudkoli)
Lokální síť — http://{core-ip}/api/TapHomeApi/v1/ (přístup přes LAN/VPN, nižší latence, vyžaduje Core 2021.3+)

Přístup přes lokální síť eliminuje závislost na internetu a snižuje latenci. Přiřaďte zdrojovému Core statickou IP nebo DHCP rezervaci, protože TapHome Core nepodporuje mDNS discovery.

Možnosti zařízení

Šablona pokrývá 15 typů zařízení. Každý typ používá specifická ValueType ID pro čtení a zápis stavu zařízení přes JSON odpověď API ($.values[?(@.valueTypeId == N)].value).

Spínání a řízení výstupů

Switch — binární zapnutí/vypnutí přes ValueType 48 (SwitchState). Čte a zapisuje 1 (ZAP) nebo 0 (VYP).
Analog Output — plynulá úroveň 0–100 % přes ValueType 42 (AnalogOutputValue). Používá se pro stmívače, ventilové pohony nebo jakékoli analogové výstupní zařízení.
Multi-Value Switch — číselný přepínač režimů s hodnotami 0–9 přes ValueType 49. Mapuje se na uživatelem definované stavy pro ovládání zařízení s více režimy.

Senzory a měření

Analog Input — generický číselný vstup přes ValueType 55 (AnalogInputValue). Pouze pro čtení.
Temperature Sensor — teplota (°C) přes ValueType 5 (RealTemperature) a vlhkost (%) přes ValueType 3. Pouze pro čtení, interval dotazování 15 sekund.
Brightness Sensor — úroveň okolního osvětlení (lux) přes ValueType 2. Pouze pro čtení, interval dotazování 15 sekund.
Wind Speed Sensor — rychlost větru (m/s) přes ValueType 14. Pouze pro čtení, interval dotazování 15 sekund.
Electricity Meter — kumulativní energie (kWh) přes ValueType 59 a okamžitý příkon (kW) přes ValueType 60. Pouze pro čtení, interval dotazování 15 sekund.
Reed Contact — binární stav otevřeno/zavřeno přes ValueType 44. Vrací 1 (Otevřeno) nebo 0 (Zavřeno). Pouze pro čtení.

Osvětlení

Dual White Light — jas (%) přes ValueType 65 (HueBrightness) a korelovaná teplota chromatičnosti přes ValueType 89 (CCT).
RGB Light — plné HSB řízení barev: odstín (0–360°) přes ValueType 40, sytost (0–100 %) přes ValueType 41, jas přes ValueType 65 a CCT přes ValueType 89.

Klima a stínění

Thermostat — čte aktuální teplotu (ValueType 5), vlhkost (ValueType 3) a řídí teplotní setpoint (ValueType 6).
Blind — úroveň pozice (%) přes ValueType 46 (BlindsLevel) a úhel natočení lamel přes ValueType 10 (BlindsSlope).
Slide — úroveň pozice (%) přes ValueType 46 (BlindsLevel). Sdílí stejný ValueType jako Blind, ale bez řízení natočení.

Obecné

Variable — univerzální číselná proměnná přes ValueType 62 (VariableState). Může reprezentovat jakoukoli vlastní hodnotu v TapHome.

Servisní diagnostika

Modul vystavuje jeden servisní atribut — Devices — který vypisuje všechna vystavená zařízení s jejich ID a typy voláním endpointu /api/TapHomeApi/v1/discovery.

Senzorová zařízení (Brightness, Variable, Wind Speed) obsahují další servisní atribut na úrovni zařízení — Value Types — který vypisuje všechna ValueType ID a názvy dostupné pro dané zařízení.

Další možnosti

TapHome API také vystavuje několik systémových ValueTypes, které šablona momentálně nedotazuje: Device Status (ID 7) pro stav zařízení, Operation Mode (ID 22) a Manual Timeout (ID 23) pro řízení manuálního/automatického režimu. Existují varianty požadovaných hodnot pro Analog Output (ID 67), Hue Brightness (ID 68) a Multi-Value Switch (ID 71), stejně jako indikátor Blinds Is Moving (ID 66). Discovery a location endpointy poskytují diagnostické informace o Core. Webhook push notifikace (throttle 300 ms) nabízejí real-time alternativu k dotazování. Tyto možnosti lze přidat v budoucí aktualizaci šablony.

Řešení problémů

API vrací 401 Unauthorized

Ověřte, že token je správný a nebyl regenerován — vygenerování nového tokenu zneplatní všechny předchozí tokeny
Zkontrolujte formát autorizační hlavičky: Authorization: TapHome {token} (všimněte si prefixu TapHome místo Bearer)
Ujistěte se, že token patří ke správné Core lokaci

API vrací 403 Forbidden

Požadované zařízení není vystaveno přes TapHome API. Na zdrojovém Core přejděte do Nastavení > Vystavit zařízení > TapHome API a ověřte, že zařízení je v seznamu.

Zastaralé nebo uložené hodnoty

API omezuje frekvenci požadavků getDeviceValue na intervaly 500 ms. Požadavky rychlejší než tento interval mohou vrátit uložené hodnoty. Porovnejte pole timestamp v odpovědi — identická časová razítka indikují uložená data. Zvyšte interval dotazování na minimálně 1 sekundu.

Požadavky na zápis vrací HTTP 503

Endpoint setDeviceValue vrací 503 (Service Unavailable) při volání častěji než každých 500 ms. Rozložte požadavky na zápis s dostatečným zpožděním.

Na jednom Core je v jednom okamžiku aktivní pouze jeden API token. Pokud jiný systém regeneruje token (např. během nastavení Home Assistant), šablona TapHome ztratí přístup. Koordinujte používání tokenu napříč všemi integracemi.

Dostupná zařízení

TapHome API Modul

Servisní atributy

Zařízení

Vlastní proměnné

API_token (string) TapHome API bearer token for authentication (generate in TapHome app under Settings → API)

TapHome API

Servisní atributy

Devices

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/discovery", "GET", "", "Authorization: TapHome " + API_token);
IF response.IsSuccess
    var max := PARSEJSON(response.content, "$.devices[-1:].deviceId");
    var ret := "";
    var i := 0;
    do
        ret := ret + "(" + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].deviceId", true) + ") ";
        ret := ret + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].name", true);
        ret := ret + " - " + PARSEJSON(response.content, "$.devices[" + tostring(i) + "].type", true);
        ret := ret + "\n";
        i := i + 1;
    loop while i < max
    
    RETURN(ret);
END

Analogový vstup (1) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (1)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (1) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (1)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (1) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (1)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (1) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (1)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (1) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (1)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (1) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (1)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (1) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (1)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (1) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (1)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (1) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (1)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (1) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (1)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (1) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (1)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (1) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (1)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (1) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (1)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (1) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (1)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (1) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (1)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (2) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (2)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (2) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (2)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (2) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (2)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (2) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (2)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (2) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (2)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (2) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (2)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (2) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (2)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (2) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (2)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (2) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (2)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (2) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (2)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (2) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (2)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (2) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (2)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (2) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (2)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (2) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (2)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (2) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (2)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (3) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (3)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (3) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (3)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (3) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (3)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (3) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (3)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (3) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (3)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (3) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (3)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (3) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (3)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (3) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (3)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (3) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (3)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (3) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (3)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (3) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (3)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (3) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (3)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (3) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (3)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (3) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (3)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (3) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (3)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (4) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (4)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (4) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (4)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (4) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (4)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (4) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (4)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (4) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (4)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (4) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (4)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (4) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (4)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (4) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (4)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (4) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (4)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (4) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (4)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (4) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (4)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (4) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (4)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (4) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (4)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (4) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (4)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (4) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (4)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (5) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (5)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (5) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (5)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (5) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (5)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (5) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (5)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (5) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (5)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (5) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (5)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (5) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (5)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (5) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (5)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (5) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (5)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (5) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (5)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (5) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (5)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (5) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (5)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (5) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (5)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (5) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (5)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (5) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (5)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (6) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (6)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (6) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (6)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (6) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (6)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (6) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (6)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (6) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (6)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (6) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (6)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (6) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (6)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (6) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (6)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (6) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (6)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (6) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (6)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (6) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (6)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (6) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (6)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (6) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (6)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (6) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (6)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (6) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (6)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (7) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (7)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (7) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (7)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (7) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (7)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (7) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (7)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (7) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (7)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (7) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (7)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (7) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (7)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (7) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (7)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (7) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (7)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (7) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (7)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (7) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (7)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (7) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (7)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (7) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (7)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (7) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (7)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (7) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (7)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (8) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (8)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (8) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (8)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (8) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (8)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (8) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (8)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (8) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (8)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (8) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (8)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (8) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (8)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (8) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (8)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (8) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (8)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (8) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (8)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (8) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (8)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (8) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (8)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (8) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (8)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (8) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (8)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (8) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (8)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (9) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (9)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (9) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (9)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (9) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (9)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (9) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (9)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (9) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (9)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (9) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (9)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (9) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (9)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (9) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (9)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (9) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (9)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (9) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (9)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (9) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (9)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (9) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (9)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (9) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (9)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (9) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (9)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (9) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (9)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (10) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (10)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (10) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (10)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (10) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (10)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (10) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (10)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (10) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (10)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (10) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (10)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (10) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (10)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (10) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (10)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (10) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (10)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (10) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (10)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (10) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (10)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (10) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (10)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (10) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (10)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (10) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (10)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (10) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (10)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (11) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (11)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (11) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (11)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (11) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (11)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (11) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (11)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (11) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (11)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (11) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (11)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (11) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (11)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (11) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (11)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (11) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (11)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (11) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (11)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (11) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (11)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (11) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (11)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (11) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (11)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (11) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (11)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (11) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (11)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (12) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (12)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (12) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (12)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (12) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (12)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (12) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (12)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (12) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (12)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (12) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (12)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (12) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (12)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (12) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (12)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (12) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (12)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (12) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (12)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (12) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (12)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (12) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (12)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (12) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (12)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (12) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (12)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (12) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (12)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (13) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (13)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (13) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (13)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (13) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (13)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (13) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (13)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (13) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (13)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (13) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (13)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (13) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (13)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (13) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (13)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (13) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (13)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (13) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (13)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (13) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (13)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (13) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (13)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (13) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (13)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (13) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (13)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (13) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (13)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (14) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (14)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (14) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (14)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (14) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (14)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (14) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (14)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (14) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (14)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (14) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (14)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (14) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (14)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (14) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (14)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (14) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (14)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (14) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (14)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (14) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (14)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (14) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (14)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (14) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (14)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (14) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (14)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (14) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (14)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový vstup (15) Analogový vstup Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový vstup (15)

Čtení vstupní úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 55)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Analogový výstup (15) Stmívač

Plynulá úroveň výstupu (0–100 %) pro stmívače, ventilové pohony nebo analogová výstupní zařízení

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Analogový výstup (15)

Čtení úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 42)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=42&value=" + Le, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Spínač (15) Přepínač

numeric json_path

Hodnoty / Stavy: ON · OFF

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Spínač (15)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 48)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=48&value=" + St, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Dual White Light (15) Bílé světlo

Ovládání jasu a korelované teploty chromatičnosti (CCT) pro laditelné bílé osvětlení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Dual White Light (15)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Elektroměr (15) Elektroměr Pouze ke čtení

Kumulativní spotřeba energie (kWh) a okamžitý příkon (kW)

numeric Jednotka: kWh / kW json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Elektroměr (15)

Čtení celkové spotřeby

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 59)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odběru

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 60)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač jasu (15) Proměnná Pouze ke čtení

numeric Jednotka: lux json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač jasu (15)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 2)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Proměnná (15) Proměnná

numeric json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Proměnná (15)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 62)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=62&value=" + Va, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

RGB Light (15) HSB světlo

Plné HSB řízení barev — odstín, sytost, jas a korelovaná teplota chromatičnosti

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

RGB Light (15)

Čtení jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 65)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis jasu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=65&value=" + Hb, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 40)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis odstínu

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=40&value=" + Hd, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 41)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis saturace

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=41&value=" + Sa, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 89)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis barevné teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=89&value=" + Ct, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Posuvné stínění (15) Posuvný

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Posuvné stínění (15)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Snímač rychlosti větru (15) Proměnná Pouze ke čtení

numeric Jednotka: m/s json_path

Servisní atributy

Typy hodnot

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Snímač rychlosti větru (15)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 14)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Servisní atributy

Value Types

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
    var ret := "";
    var i := 0;
    do
        if ! isnull(PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true))
            ret := ret + PARSEJSON(response.content, "$.values[" + i + "].valueTypeId", true);
            ret := ret + " - " + PARSEJSON(response.content, "$.values[" + i + "].valueTypeName", true);
            ret := ret + "\n";
        end
        i := i + 1;
    loop while i < 10
    RETURN(ret);
END

Jazýčkový kontakt (15) Jazýčkový kontakt Pouze ke čtení

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Jazýčkový kontakt (15)

Čtení

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 44)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Teplotní snímač (15) Teplotní senzor Pouze ke čtení

Měření teploty (°C) a vlhkosti (%)

numeric Jednotka: °C / % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Teplotní snímač (15)

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Termostat (15) Termostat

Aktuální teplota, vlhkost a nastavitelný teplotní setpoint

numeric Jednotka: °C json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Termostat (15)

Čtení teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 5)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení vlhkosti

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 3)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 6)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis požadované teploty

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=6&value=" + Se, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Vícehodnotový spínač (15) Vícestavový přepínač

Číselný přepínač režimů s hodnotami 0–9 pro ovládání zařízení s více režimy

numeric json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Vícehodnotový spínač (15)

Čtení stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 49)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis stavu přepínače

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=49&value=" + Mu, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Žaluzie (15) Žaluzie

Úroveň pozice (%) a řízení úhlu natočení lamel pro žaluzie a rolety

numeric Jednotka: % json_path

Proměnná: Id — TapHome device ID — set to the ID of the device you want to control (find in TapHome app or via /discovery endpoint)

Žaluzie (15)

Čtení úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 46)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis úrovně žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=46&value=" + Bl, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Čtení sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/getDeviceValue/" + Id, "GET", "", "Authorization: TapHome " + API_token);
IF(response.IsSuccess)
 var value := PARSEJSON(response.content, "$.values[?(@.valueTypeId == 10)].value", true);
 IF ISNULL(value)
 	ADDERROR("Incorrect device type for ID " + Id);
	RETURN(NaN);
 ELSE
 	RETURN(TODOUBLE(value));
 END
ELSE
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Zápis sklonu žaluzie

VAR response := SENDHTTPREQUEST("/api/taphomeapi/v1/setDeviceValue/" + Id + "?valueTypeId=10&value=" + Bs, "GET", "", "Authorization: TapHome " + API_token);
IF(!response.IsSuccess)
 ADDERROR("Response:" + response.StatusCode + "|" + PARSEJSON(response.content, "$.title") + " - " + PARSEJSON(response.content, "$.detail"));
 RETURN(NaN);
END

Připojení: Packet Parser → HTTP

Možná vylepšení (10)

Device Status — DeviceStatus (read-only) available on all devices via discovery but not polled by template
Operation Mode — OperationMode (manual/automatic) — system property visible in getDeviceValue response
Manual Timeout — ManualTimeout — system property visible in getDeviceValue response
Analog Output Desired Value — AnalogOutputDesiredValue — separate from actual AnalogOutputValue (42)
Hue Brightness Desired Value — HueBrightnessDesiredValue — desired vs actual brightness for lighting
Multi-Value Switch Desired State — MultiValueSwitchDesiredState — desired vs actual state for MVS
Blinds Is Moving — BlindsIsMoving — motion detection for blind/slide devices
Device Discovery — Full device list with supported value types — available via module SA but not per-device
Location Info — Core location metadata and connectivity status
Webhook Push Notifications — Real-time state change notifications via HTTP POST — 300ms throttle, alternative to polling

Stáhnout šablonu

Zdroje

TapHome API Official Documentation
taphome.com 2026-03-28
TapHome HA Integration — ValueType Reference
github.com 2026-03-28
TapHome HA Integration — API Client Implementation
github.com 2026-03-28