Configuration of blinds

Position and angle of TapHome Blinds is based on timing. Micro-controller inside module that controls at least 2 digital outputs, calculates exactly how long the blind is going in up and down directions.

There are 2 types of blinds:

  • Blinds (with angle)
  • Slide (without angle)

Initial setup

  1. Open configuration of module with at least 2 digital outputs (All devices → DO12  /  NTC2DI2DO2  /  CORE14  /  LED/OC)
  2. Enable Blind 1
  3. Set its name, type and terminals for up and down direction
    Blind 1
    Enabled(tick)
    NameMy Blind
    TypeBlind
    UpDO4
    DownDO5